This is the latest recevied telemetry packets stored in our database for station/object DL1KDA-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777060642 | 107 Count | 184 Count | 100 Count | 0 VDC | 0 VDC |
| 1777058838 | 98 Count | 165 Count | 92 Count | 0 VDC | 0 VDC |
| 1777057034 | 87 Count | 144 Count | 82 Count | 0 VDC | 0 VDC |
| 1777055230 | 77 Count | 124 Count | 73 Count | 0 VDC | 0 VDC |
| 1777053426 | 49 Count | 87 Count | 46 Count | 0 VDC | 0 VDC |
| 1777051622 | 41 Count | 68 Count | 39 Count | 0 VDC | 0 VDC |
| 1777049818 | 24 Count | 43 Count | 23 Count | 0 VDC | 0 VDC |
| 1777048013 | 15 Count | 24 Count | 15 Count | 0 VDC | 0 VDC |
| 1777046209 | 596 Count | 1021 Count | 556 Count | 0 VDC | 0 VDC |
| 1777044405 | 567 Count | 981 Count | 528 Count | 0 VDC | 0 VDC |
| 1777042601 | 542 Count | 945 Count | 504 Count | 0 VDC | 0 VDC |
| 1777040797 | 528 Count | 924 Count | 491 Count | 0 VDC | 0 VDC |
| 1777038993 | 509 Count | 900 Count | 473 Count | 0 VDC | 0 VDC |
| 1777037189 | 499 Count | 888 Count | 464 Count | 0 VDC | 0 VDC |
| 1777035385 | 481 Count | 865 Count | 447 Count | 0 VDC | 0 VDC |
| 1777033581 | 454 Count | 833 Count | 421 Count | 0 VDC | 0 VDC |
| 1777031777 | 429 Count | 803 Count | 397 Count | 0 VDC | 0 VDC |
| 1777029973 | 399 Count | 768 Count | 368 Count | 0 VDC | 0 VDC |
| 1777028169 | 390 Count | 757 Count | 360 Count | 0 VDC | 0 VDC |
| 1777026365 | 383 Count | 747 Count | 354 Count | 0 VDC | 0 VDC |
| 1777024561 | 369 Count | 725 Count | 341 Count | 0 VDC | 0 VDC |
| 1777022757 | 363 Count | 716 Count | 336 Count | 0 VDC | 0 VDC |
| 1777020953 | 356 Count | 707 Count | 330 Count | 0 VDC | 0 VDC |
| 1777019149 | 352 Count | 700 Count | 327 Count | 0 VDC | 0 VDC |
| 1777017345 | 347 Count | 689 Count | 323 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)