This is the latest recevied telemetry packets stored in our database for station/object UN9GIE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788988063 | 677 Count | 955 Count | 0 Count | 0 VDC | 0 VDC |
| 1788987460 | 676 Count | 954 Count | 0 Count | 0 VDC | 0 VDC |
| 1788986857 | 675 Count | 952 Count | 0 Count | 0 VDC | 0 VDC |
| 1788986252 | 674 Count | 950 Count | 0 Count | 0 VDC | 0 VDC |
| 1788985649 | 673 Count | 949 Count | 0 Count | 0 VDC | 0 VDC |
| 1788985045 | 672 Count | 948 Count | 0 Count | 0 VDC | 0 VDC |
| 1788984442 | 671 Count | 945 Count | 0 Count | 0 VDC | 0 VDC |
| 1788983839 | 670 Count | 943 Count | 0 Count | 0 VDC | 0 VDC |
| 1788983235 | 669 Count | 942 Count | 0 Count | 0 VDC | 0 VDC |
| 1788982632 | 668 Count | 940 Count | 0 Count | 0 VDC | 0 VDC |
| 1788982028 | 667 Count | 938 Count | 0 Count | 0 VDC | 0 VDC |
| 1788981425 | 666 Count | 937 Count | 0 Count | 0 VDC | 0 VDC |
| 1788980822 | 665 Count | 935 Count | 0 Count | 0 VDC | 0 VDC |
| 1788980218 | 664 Count | 934 Count | 0 Count | 0 VDC | 0 VDC |
| 1788979615 | 663 Count | 933 Count | 0 Count | 0 VDC | 0 VDC |
| 1788979011 | 662 Count | 931 Count | 0 Count | 0 VDC | 0 VDC |
| 1788978408 | 661 Count | 931 Count | 0 Count | 0 VDC | 0 VDC |
| 1788977805 | 660 Count | 931 Count | 0 Count | 0 VDC | 0 VDC |
| 1788977201 | 659 Count | 929 Count | 0 Count | 0 VDC | 0 VDC |
| 1788976598 | 658 Count | 929 Count | 0 Count | 0 VDC | 0 VDC |
| 1788975994 | 657 Count | 927 Count | 0 Count | 0 VDC | 0 VDC |
| 1788975391 | 656 Count | 925 Count | 0 Count | 0 VDC | 0 VDC |
| 1788974787 | 655 Count | 925 Count | 0 Count | 0 VDC | 0 VDC |
| 1788974183 | 654 Count | 923 Count | 0 Count | 0 VDC | 0 VDC |
| 1788973580 | 653 Count | 921 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)