This is the latest recevied telemetry packets stored in our database for station/object LW2DHT-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777413296 | 489 Count | 429 Count | 348 Count | 0 VDC | 0 VDC |
| 1777411493 | 485 Count | 425 Count | 345 Count | 0 VDC | 0 VDC |
| 1777409690 | 481 Count | 421 Count | 342 Count | 0 VDC | 0 VDC |
| 1777407887 | 476 Count | 416 Count | 338 Count | 0 VDC | 0 VDC |
| 1777406083 | 471 Count | 411 Count | 334 Count | 0 VDC | 0 VDC |
| 1777404280 | 467 Count | 407 Count | 331 Count | 0 VDC | 0 VDC |
| 1777402477 | 462 Count | 402 Count | 327 Count | 0 VDC | 0 VDC |
| 1777400674 | 457 Count | 397 Count | 323 Count | 0 VDC | 0 VDC |
| 1777398871 | 452 Count | 392 Count | 319 Count | 0 VDC | 0 VDC |
| 1777395300 | 439 Count | 384 Count | 312 Count | 0 VDC | 0 VDC |
| 1777391693 | 429 Count | 374 Count | 304 Count | 0 VDC | 0 VDC |
| 1777389890 | 424 Count | 369 Count | 300 Count | 0 VDC | 0 VDC |
| 1777384481 | 410 Count | 357 Count | 289 Count | 0 VDC | 0 VDC |
| 1777382678 | 405 Count | 352 Count | 285 Count | 0 VDC | 0 VDC |
| 1777380875 | 401 Count | 348 Count | 282 Count | 0 VDC | 0 VDC |
| 1777379072 | 396 Count | 343 Count | 278 Count | 0 VDC | 0 VDC |
| 1777375466 | 387 Count | 334 Count | 271 Count | 0 VDC | 0 VDC |
| 1777371905 | 376 Count | 328 Count | 266 Count | 0 VDC | 0 VDC |
| 1777370098 | 372 Count | 324 Count | 263 Count | 0 VDC | 0 VDC |
| 1777368291 | 368 Count | 320 Count | 260 Count | 0 VDC | 0 VDC |
| 1777366485 | 364 Count | 316 Count | 257 Count | 0 VDC | 0 VDC |
| 1777364681 | 360 Count | 312 Count | 254 Count | 0 VDC | 0 VDC |
| 1777362878 | 356 Count | 308 Count | 251 Count | 0 VDC | 0 VDC |
| 1777361075 | 351 Count | 303 Count | 247 Count | 0 VDC | 0 VDC |
| 1777357469 | 342 Count | 295 Count | 240 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)