This is the latest recevied telemetry packets stored in our database for station/object SR9SRC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1763875472 | 0 Count | 595 Count | 0 Count | 0 VDC | 0 VDC |
| 1763874872 | 0 Count | 585 Count | 0 Count | 0 VDC | 0 VDC |
| 1763874272 | 0 Count | 580 Count | 0 Count | 0 VDC | 0 VDC |
| 1763873672 | 0 Count | 564 Count | 0 Count | 0 VDC | 0 VDC |
| 1763873072 | 0 Count | 556 Count | 0 Count | 0 VDC | 0 VDC |
| 1763872472 | 0 Count | 548 Count | 0 Count | 0 VDC | 0 VDC |
| 1763871871 | 0 Count | 535 Count | 0 Count | 0 VDC | 0 VDC |
| 1763871271 | 0 Count | 521 Count | 0 Count | 0 VDC | 0 VDC |
| 1763870671 | 0 Count | 514 Count | 0 Count | 0 VDC | 0 VDC |
| 1763870071 | 0 Count | 501 Count | 0 Count | 0 VDC | 0 VDC |
| 1763869471 | 0 Count | 490 Count | 0 Count | 0 VDC | 0 VDC |
| 1763868871 | 0 Count | 479 Count | 0 Count | 0 VDC | 0 VDC |
| 1763868271 | 0 Count | 467 Count | 0 Count | 0 VDC | 0 VDC |
| 1763867671 | 0 Count | 440 Count | 0 Count | 0 VDC | 0 VDC |
| 1763867071 | 0 Count | 432 Count | 0 Count | 0 VDC | 0 VDC |
| 1763866471 | 0 Count | 420 Count | 0 Count | 0 VDC | 0 VDC |
| 1763865871 | 0 Count | 410 Count | 0 Count | 0 VDC | 0 VDC |
| 1763865271 | 0 Count | 401 Count | 0 Count | 0 VDC | 0 VDC |
| 1763864670 | 0 Count | 388 Count | 0 Count | 0 VDC | 0 VDC |
| 1763864070 | 0 Count | 375 Count | 0 Count | 0 VDC | 0 VDC |
| 1763863470 | 0 Count | 369 Count | 0 Count | 0 VDC | 0 VDC |
| 1763862870 | 0 Count | 361 Count | 0 Count | 0 VDC | 0 VDC |
| 1763862272 | 0 Count | 352 Count | 0 Count | 0 VDC | 0 VDC |
| 1763861672 | 0 Count | 337 Count | 0 Count | 0 VDC | 0 VDC |
| 1763861072 | 0 Count | 328 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)