This is the latest recevied telemetry packets stored in our database for station/object DO7SRB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778676549 | 565 Count | 906 Count | 372 Count | 4.42 VDC | 0.14 VDC |
| 1778674744 | 563 Count | 891 Count | 371 Count | 4.55 VDC | 0.14 VDC |
| 1778672939 | 561 Count | 885 Count | 370 Count | 4.4 VDC | 0.14 VDC |
| 1778671133 | 559 Count | 883 Count | 369 Count | 4.44 VDC | 0.14 VDC |
| 1778669328 | 556 Count | 879 Count | 367 Count | 4.45 VDC | 0.14 VDC |
| 1778667522 | 553 Count | 874 Count | 365 Count | 4.44 VDC | 0.14 VDC |
| 1778665717 | 550 Count | 869 Count | 363 Count | 4.5 VDC | 0.14 VDC |
| 1778663912 | 548 Count | 865 Count | 362 Count | 4.5 VDC | 0.14 VDC |
| 1778662107 | 544 Count | 860 Count | 359 Count | 4.44 VDC | 0.14 VDC |
| 1778660301 | 541 Count | 855 Count | 357 Count | 4.42 VDC | 0.14 VDC |
| 1778658562 | 535 Count | 848 Count | 352 Count | 4.44 VDC | 0.14 VDC |
| 1778656757 | 533 Count | 842 Count | 351 Count | 4.49 VDC | 0.14 VDC |
| 1778654956 | 530 Count | 838 Count | 349 Count | 4.5 VDC | 0.14 VDC |
| 1778653142 | 528 Count | 835 Count | 348 Count | 4.52 VDC | 0.14 VDC |
| 1778651337 | 525 Count | 831 Count | 346 Count | 4.43 VDC | 0.14 VDC |
| 1778649531 | 523 Count | 829 Count | 345 Count | 4.5 VDC | 0.14 VDC |
| 1778647726 | 519 Count | 825 Count | 342 Count | 4.53 VDC | 0.14 VDC |
| 1778645921 | 517 Count | 822 Count | 341 Count | 4.48 VDC | 0.14 VDC |
| 1778644116 | 514 Count | 817 Count | 339 Count | 4.46 VDC | 0.14 VDC |
| 1778642311 | 512 Count | 813 Count | 338 Count | 4.47 VDC | 0.14 VDC |
| 1778640505 | 509 Count | 810 Count | 336 Count | 4.43 VDC | 0.14 VDC |
| 1778638700 | 508 Count | 807 Count | 336 Count | 4.53 VDC | 0.14 VDC |
| 1778636960 | 505 Count | 803 Count | 334 Count | 4.4 VDC | 0.14 VDC |
| 1778635155 | 502 Count | 798 Count | 332 Count | 4.49 VDC | 0.14 VDC |
| 1778633349 | 500 Count | 795 Count | 331 Count | 4.46 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)