This is the latest recevied telemetry packets stored in our database for station/object SP2AJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777388512 | 236 Count | 335 Count | 201 Count | 0 VDC | 0 VDC |
| 1777387611 | 227 Count | 325 Count | 193 Count | 0 VDC | 0 VDC |
| 1777386710 | 220 Count | 316 Count | 187 Count | 0 VDC | 0 VDC |
| 1777385810 | 216 Count | 312 Count | 184 Count | 0 VDC | 0 VDC |
| 1777384909 | 209 Count | 303 Count | 178 Count | 0 VDC | 0 VDC |
| 1777384008 | 203 Count | 297 Count | 173 Count | 0 VDC | 0 VDC |
| 1777383107 | 195 Count | 288 Count | 166 Count | 0 VDC | 0 VDC |
| 1777382207 | 188 Count | 280 Count | 160 Count | 0 VDC | 0 VDC |
| 1777381306 | 180 Count | 273 Count | 153 Count | 0 VDC | 0 VDC |
| 1777380405 | 174 Count | 266 Count | 148 Count | 0 VDC | 0 VDC |
| 1777379504 | 167 Count | 257 Count | 142 Count | 0 VDC | 0 VDC |
| 1777378604 | 161 Count | 250 Count | 137 Count | 0 VDC | 0 VDC |
| 1777377703 | 153 Count | 234 Count | 130 Count | 0 VDC | 0 VDC |
| 1777376802 | 143 Count | 207 Count | 121 Count | 0 VDC | 0 VDC |
| 1777375901 | 140 Count | 188 Count | 119 Count | 0 VDC | 0 VDC |
| 1777375000 | 133 Count | 179 Count | 113 Count | 0 VDC | 0 VDC |
| 1777374119 | 127 Count | 167 Count | 108 Count | 0 VDC | 0 VDC |
| 1777373218 | 122 Count | 161 Count | 104 Count | 0 VDC | 0 VDC |
| 1777372317 | 116 Count | 154 Count | 99 Count | 0 VDC | 0 VDC |
| 1777371416 | 109 Count | 145 Count | 93 Count | 0 VDC | 0 VDC |
| 1777370516 | 104 Count | 139 Count | 89 Count | 0 VDC | 0 VDC |
| 1777369615 | 100 Count | 134 Count | 86 Count | 0 VDC | 0 VDC |
| 1777368714 | 95 Count | 128 Count | 82 Count | 0 VDC | 0 VDC |
| 1777367813 | 89 Count | 121 Count | 77 Count | 0 VDC | 0 VDC |
| 1777366913 | 82 Count | 112 Count | 71 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)