This is the latest recevied telemetry packets stored in our database for station/object SQ7I-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783241737 | 162 Count | 523 Count | 68 Count | 0 VDC | 0 VDC |
| 1783239937 | 161 Count | 521 Count | 67 Count | 0 VDC | 0 VDC |
| 1783238137 | 157 Count | 518 Count | 65 Count | 0 VDC | 0 VDC |
| 1783236337 | 157 Count | 517 Count | 65 Count | 0 VDC | 0 VDC |
| 1783234537 | 155 Count | 516 Count | 65 Count | 0 VDC | 0 VDC |
| 1783232737 | 155 Count | 515 Count | 65 Count | 0 VDC | 0 VDC |
| 1783230937 | 151 Count | 512 Count | 63 Count | 0 VDC | 0 VDC |
| 1783229137 | 150 Count | 510 Count | 62 Count | 0 VDC | 0 VDC |
| 1783227337 | 150 Count | 509 Count | 62 Count | 0 VDC | 0 VDC |
| 1783225537 | 150 Count | 508 Count | 62 Count | 0 VDC | 0 VDC |
| 1783223737 | 150 Count | 507 Count | 62 Count | 0 VDC | 0 VDC |
| 1783221936 | 150 Count | 506 Count | 62 Count | 0 VDC | 0 VDC |
| 1783220141 | 150 Count | 505 Count | 62 Count | 0 VDC | 0 VDC |
| 1783218341 | 150 Count | 504 Count | 62 Count | 0 VDC | 0 VDC |
| 1783214741 | 149 Count | 501 Count | 61 Count | 0 VDC | 0 VDC |
| 1783212941 | 149 Count | 500 Count | 61 Count | 0 VDC | 0 VDC |
| 1783211141 | 148 Count | 498 Count | 60 Count | 0 VDC | 0 VDC |
| 1783209341 | 147 Count | 496 Count | 59 Count | 0 VDC | 0 VDC |
| 1783207541 | 147 Count | 495 Count | 59 Count | 0 VDC | 0 VDC |
| 1783205741 | 147 Count | 494 Count | 59 Count | 0 VDC | 0 VDC |
| 1783203940 | 146 Count | 492 Count | 58 Count | 0 VDC | 0 VDC |
| 1783202140 | 144 Count | 491 Count | 58 Count | 0 VDC | 0 VDC |
| 1783200340 | 143 Count | 489 Count | 57 Count | 0 VDC | 0 VDC |
| 1783198536 | 143 Count | 488 Count | 57 Count | 0 VDC | 0 VDC |
| 1783193135 | 139 Count | 485 Count | 57 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)