This is the latest recevied telemetry packets stored in our database for station/object SR7NSI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785419558 | 442 Count | 874 Count | 332 Count | 0 VDC | 0 VDC |
| 1785418957 | 441 Count | 873 Count | 332 Count | 0 VDC | 0 VDC |
| 1785418356 | 440 Count | 872 Count | 332 Count | 0 VDC | 0 VDC |
| 1785417755 | 439 Count | 871 Count | 332 Count | 0 VDC | 0 VDC |
| 1785417155 | 438 Count | 870 Count | 332 Count | 0 VDC | 0 VDC |
| 1785416585 | 433 Count | 869 Count | 332 Count | 0 VDC | 0 VDC |
| 1785415984 | 432 Count | 868 Count | 332 Count | 0 VDC | 0 VDC |
| 1785415383 | 431 Count | 867 Count | 332 Count | 0 VDC | 0 VDC |
| 1785414782 | 430 Count | 866 Count | 332 Count | 0 VDC | 0 VDC |
| 1785414181 | 429 Count | 865 Count | 332 Count | 0 VDC | 0 VDC |
| 1785413580 | 428 Count | 864 Count | 332 Count | 0 VDC | 0 VDC |
| 1785412979 | 427 Count | 863 Count | 332 Count | 0 VDC | 0 VDC |
| 1785412378 | 426 Count | 862 Count | 332 Count | 0 VDC | 0 VDC |
| 1785411778 | 425 Count | 861 Count | 332 Count | 0 VDC | 0 VDC |
| 1785411177 | 424 Count | 855 Count | 332 Count | 0 VDC | 0 VDC |
| 1785410576 | 423 Count | 854 Count | 332 Count | 0 VDC | 0 VDC |
| 1785409975 | 422 Count | 853 Count | 332 Count | 0 VDC | 0 VDC |
| 1785409374 | 421 Count | 852 Count | 332 Count | 0 VDC | 0 VDC |
| 1785408773 | 420 Count | 851 Count | 332 Count | 0 VDC | 0 VDC |
| 1785408172 | 419 Count | 850 Count | 332 Count | 0 VDC | 0 VDC |
| 1785407572 | 418 Count | 849 Count | 332 Count | 0 VDC | 0 VDC |
| 1785406971 | 417 Count | 848 Count | 332 Count | 0 VDC | 0 VDC |
| 1785406370 | 416 Count | 847 Count | 332 Count | 0 VDC | 0 VDC |
| 1785405769 | 415 Count | 846 Count | 332 Count | 0 VDC | 0 VDC |
| 1785405168 | 414 Count | 845 Count | 332 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)