This is the latest recevied telemetry packets stored in our database for station/object SR8NDR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792416642 | 191 Count | 406 Count | 169 Count | 0 VDC | 0 VDC |
| 1792414242 | 149 Count | 319 Count | 129 Count | 0 VDC | 0 VDC |
| 1792411838 | 112 Count | 234 Count | 95 Count | 0 VDC | 0 VDC |
| 1792411733 | 104 Count | 230 Count | 95 Count | 0 VDC | 0 VDC |
| 1792006432 | 100 Count | 228 Count | 95 Count | 0 VDC | 0 VDC |
| 1792004030 | 76 Count | 172 Count | 73 Count | 0 VDC | 0 VDC |
| 1792001623 | 49 Count | 105 Count | 48 Count | 0 VDC | 0 VDC |
| 1791996820 | 407 Count | 947 Count | 372 Count | 0 VDC | 0 VDC |
| 1791994418 | 365 Count | 856 Count | 332 Count | 0 VDC | 0 VDC |
| 1791992016 | 346 Count | 806 Count | 315 Count | 0 VDC | 0 VDC |
| 1791987793 | 308 Count | 719 Count | 285 Count | 0 VDC | 0 VDC |
| 1791985390 | 285 Count | 660 Count | 264 Count | 0 VDC | 0 VDC |
| 1791982988 | 266 Count | 611 Count | 247 Count | 0 VDC | 0 VDC |
| 1791980589 | 193 Count | 437 Count | 177 Count | 0 VDC | 0 VDC |
| 1791917701 | 176 Count | 408 Count | 170 Count | 0 VDC | 0 VDC |
| 1791915300 | 120 Count | 266 Count | 116 Count | 0 VDC | 0 VDC |
| 1791912898 | 72 Count | 147 Count | 70 Count | 0 VDC | 0 VDC |
| 1791910497 | 8 Count | 21 Count | 8 Count | 0 VDC | 0 VDC |
| 1791905693 | 535 Count | 942 Count | 412 Count | 0 VDC | 0 VDC |
| 1791903292 | 512 Count | 888 Count | 391 Count | 0 VDC | 0 VDC |
| 1791900890 | 483 Count | 824 Count | 364 Count | 0 VDC | 0 VDC |
| 1791898489 | 423 Count | 710 Count | 306 Count | 0 VDC | 0 VDC |
| 1791888688 | 410 Count | 703 Count | 305 Count | 0 VDC | 0 VDC |
| 1791888435 | 406 Count | 699 Count | 305 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)