This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1747961662 | 54 Count | 565 Count | 0 Count | 4.05 VDC | 0 VDC |
| 1747959862 | 52 Count | 548 Count | 0 Count | 4.05 VDC | 0 VDC |
| 1747958064 | 50 Count | 532 Count | 0 Count | 4.05 VDC | 0 VDC |
| 1747956265 | 48 Count | 511 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1747954465 | 46 Count | 488 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1747952666 | 44 Count | 467 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1747950866 | 42 Count | 425 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1747949067 | 40 Count | 401 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1747947268 | 38 Count | 375 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1747945468 | 36 Count | 351 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1747943669 | 34 Count | 327 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1747941870 | 32 Count | 301 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1747940071 | 30 Count | 279 Count | 0 Count | 4.06 VDC | 2.66 VDC |
| 1747938271 | 28 Count | 247 Count | 0 Count | 4.06 VDC | 5.5 VDC |
| 1747936473 | 26 Count | 222 Count | 0 Count | 4.07 VDC | 5.5 VDC |
| 1747934673 | 24 Count | 200 Count | 0 Count | 4.07 VDC | 5.52 VDC |
| 1747932874 | 22 Count | 182 Count | 0 Count | 4.08 VDC | 5.52 VDC |
| 1747931075 | 20 Count | 169 Count | 0 Count | 4.08 VDC | 5.54 VDC |
| 1747929277 | 18 Count | 154 Count | 0 Count | 4.08 VDC | 5.54 VDC |
| 1747927476 | 16 Count | 137 Count | 0 Count | 4.08 VDC | 5.54 VDC |
| 1747925679 | 14 Count | 118 Count | 0 Count | 4.08 VDC | 5.56 VDC |
| 1747923879 | 12 Count | 103 Count | 0 Count | 4.08 VDC | 5.56 VDC |
| 1747922079 | 10 Count | 88 Count | 0 Count | 4.08 VDC | 5.56 VDC |
| 1747920280 | 8 Count | 75 Count | 0 Count | 4.08 VDC | 5.56 VDC |
| 1747918482 | 6 Count | 55 Count | 0 Count | 4.08 VDC | 5.56 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)