This is the latest recevied telemetry packets stored in our database for station/object SQ2WSZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792890747 | 188 Count | 450 Count | 151 Count | 0 VDC | 0 VDC |
| 1792890147 | 182 Count | 437 Count | 146 Count | 0 VDC | 0 VDC |
| 1792889546 | 178 Count | 422 Count | 143 Count | 0 VDC | 0 VDC |
| 1792888945 | 174 Count | 411 Count | 140 Count | 0 VDC | 0 VDC |
| 1792888345 | 169 Count | 400 Count | 136 Count | 0 VDC | 0 VDC |
| 1792887744 | 164 Count | 389 Count | 132 Count | 0 VDC | 0 VDC |
| 1792887143 | 156 Count | 373 Count | 125 Count | 0 VDC | 0 VDC |
| 1792886542 | 150 Count | 359 Count | 120 Count | 0 VDC | 0 VDC |
| 1792885942 | 146 Count | 347 Count | 117 Count | 0 VDC | 0 VDC |
| 1792885341 | 141 Count | 336 Count | 113 Count | 0 VDC | 0 VDC |
| 1792884740 | 136 Count | 320 Count | 109 Count | 0 VDC | 0 VDC |
| 1792884139 | 130 Count | 305 Count | 104 Count | 0 VDC | 0 VDC |
| 1792883539 | 127 Count | 296 Count | 102 Count | 0 VDC | 0 VDC |
| 1792882937 | 118 Count | 279 Count | 94 Count | 0 VDC | 0 VDC |
| 1792882336 | 114 Count | 267 Count | 91 Count | 0 VDC | 0 VDC |
| 1792881736 | 109 Count | 257 Count | 87 Count | 0 VDC | 0 VDC |
| 1792881135 | 102 Count | 245 Count | 81 Count | 0 VDC | 0 VDC |
| 1792880534 | 93 Count | 222 Count | 73 Count | 0 VDC | 0 VDC |
| 1792879934 | 89 Count | 208 Count | 70 Count | 0 VDC | 0 VDC |
| 1792879333 | 80 Count | 186 Count | 62 Count | 0 VDC | 0 VDC |
| 1792878732 | 76 Count | 172 Count | 59 Count | 0 VDC | 0 VDC |
| 1792878131 | 71 Count | 161 Count | 55 Count | 0 VDC | 0 VDC |
| 1792877531 | 65 Count | 148 Count | 50 Count | 0 VDC | 0 VDC |
| 1792876930 | 59 Count | 134 Count | 45 Count | 0 VDC | 0 VDC |
| 1792876329 | 55 Count | 121 Count | 42 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)