This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785374814 | 208 Count | 526 Count | 0 Count | 4.13 VDC | 1 VDC |
| 1785373015 | 206 Count | 519 Count | 0 Count | 4.13 VDC | 1 VDC |
| 1785371215 | 204 Count | 513 Count | 0 Count | 4.13 VDC | 1 VDC |
| 1785369416 | 202 Count | 507 Count | 0 Count | 4.13 VDC | 1 VDC |
| 1785367614 | 200 Count | 502 Count | 0 Count | 4.13 VDC | 1 VDC |
| 1785365806 | 193 Count | 497 Count | 0 Count | 4.13 VDC | 1 VDC |
| 1785364007 | 191 Count | 490 Count | 0 Count | 4.14 VDC | 1 VDC |
| 1785362207 | 189 Count | 485 Count | 0 Count | 4.14 VDC | 1 VDC |
| 1785360407 | 187 Count | 479 Count | 0 Count | 4.15 VDC | 1 VDC |
| 1785358609 | 185 Count | 473 Count | 0 Count | 4.15 VDC | 1 VDC |
| 1785356809 | 183 Count | 467 Count | 0 Count | 4.15 VDC | 1 VDC |
| 1785355011 | 181 Count | 456 Count | 0 Count | 4.15 VDC | 1 VDC |
| 1785353210 | 179 Count | 450 Count | 0 Count | 4.15 VDC | 1 VDC |
| 1785351412 | 177 Count | 444 Count | 0 Count | 4.15 VDC | 1 VDC |
| 1785349612 | 175 Count | 438 Count | 0 Count | 4.15 VDC | 2.82 VDC |
| 1785347814 | 173 Count | 432 Count | 0 Count | 4.15 VDC | 4.62 VDC |
| 1785346014 | 171 Count | 428 Count | 0 Count | 4.16 VDC | 5 VDC |
| 1785344205 | 164 Count | 424 Count | 0 Count | 4.17 VDC | 5.14 VDC |
| 1785342406 | 162 Count | 419 Count | 0 Count | 4.17 VDC | 5.14 VDC |
| 1785340606 | 160 Count | 414 Count | 0 Count | 4.17 VDC | 5.14 VDC |
| 1785338808 | 158 Count | 409 Count | 0 Count | 4.17 VDC | 5.14 VDC |
| 1785337009 | 156 Count | 404 Count | 0 Count | 4.17 VDC | 5.16 VDC |
| 1785335209 | 154 Count | 399 Count | 0 Count | 4.18 VDC | 5.16 VDC |
| 1785333411 | 152 Count | 394 Count | 0 Count | 4.2 VDC | 5.14 VDC |
| 1785331610 | 150 Count | 389 Count | 0 Count | 4.11 VDC | 5.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)