This is the latest recevied telemetry packets stored in our database for station/object SP2AJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785383208 | 162 Count | 394 Count | 150 Count | 0 VDC | 0 VDC |
| 1785382307 | 145 Count | 346 Count | 134 Count | 0 VDC | 0 VDC |
| 1785381407 | 129 Count | 295 Count | 119 Count | 0 VDC | 0 VDC |
| 1785380506 | 111 Count | 251 Count | 102 Count | 0 VDC | 0 VDC |
| 1785379605 | 97 Count | 219 Count | 89 Count | 0 VDC | 0 VDC |
| 1785378704 | 84 Count | 193 Count | 77 Count | 0 VDC | 0 VDC |
| 1785377804 | 69 Count | 168 Count | 63 Count | 0 VDC | 0 VDC |
| 1785376903 | 60 Count | 146 Count | 55 Count | 0 VDC | 0 VDC |
| 1785376002 | 49 Count | 121 Count | 45 Count | 0 VDC | 0 VDC |
| 1785375101 | 39 Count | 96 Count | 36 Count | 0 VDC | 0 VDC |
| 1785374201 | 25 Count | 65 Count | 23 Count | 0 VDC | 0 VDC |
| 1785373300 | 17 Count | 38 Count | 16 Count | 0 VDC | 0 VDC |
| 1785373015 | 12 Count | 29 Count | 12 Count | 0 VDC | 0 VDC |
| 1785372114 | 517 Count | 1019 Count | 436 Count | 0 VDC | 0 VDC |
| 1785371212 | 501 Count | 990 Count | 421 Count | 0 VDC | 0 VDC |
| 1785370311 | 495 Count | 970 Count | 416 Count | 0 VDC | 0 VDC |
| 1785369411 | 484 Count | 949 Count | 406 Count | 0 VDC | 0 VDC |
| 1785368510 | 474 Count | 928 Count | 397 Count | 0 VDC | 0 VDC |
| 1785367609 | 464 Count | 907 Count | 388 Count | 0 VDC | 0 VDC |
| 1785366708 | 457 Count | 890 Count | 382 Count | 0 VDC | 0 VDC |
| 1785365808 | 451 Count | 871 Count | 377 Count | 0 VDC | 0 VDC |
| 1785364907 | 443 Count | 854 Count | 370 Count | 0 VDC | 0 VDC |
| 1785364006 | 435 Count | 833 Count | 363 Count | 0 VDC | 0 VDC |
| 1785363105 | 428 Count | 816 Count | 357 Count | 0 VDC | 0 VDC |
| 1785362205 | 420 Count | 798 Count | 350 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)