This is the latest recevied telemetry packets stored in our database for station/object LX1LW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770074599 | 506 | 45 | 0 | 0 | 0 |
| 1770073698 | 506 | 45 | 0 | 0 | 0 |
| 1770072798 | 507 | 45 | 0 | 0 | 0 |
| 1770071898 | 507 | 45 | 0 | 0 | 0 |
| 1770070998 | 507 | 45 | 0 | 0 | 0 |
| 1770070098 | 506 | 38 | 0 | 0 | 0 |
| 1770069198 | 506 | 41 | 0 | 0 | 0 |
| 1770068298 | 506 | 45 | 0 | 0 | 0 |
| 1770067398 | 507 | 44 | 0 | 0 | 0 |
| 1770066498 | 507 | 45 | 0 | 0 | 0 |
| 1770065597 | 506 | 44 | 0 | 0 | 0 |
| 1770064697 | 507 | 45 | 0 | 0 | 0 |
| 1770063797 | 506 | 45 | 0 | 0 | 0 |
| 1770062897 | 507 | 44 | 0 | 0 | 0 |
| 1770061997 | 506 | 43 | 0 | 0 | 0 |
| 1770061096 | 507 | 44 | 0 | 0 | 0 |
| 1770060196 | 506 | 44 | 0 | 0 | 0 |
| 1770059296 | 506 | 44 | 0 | 0 | 0 |
| 1770058396 | 507 | 44 | 0 | 0 | 0 |
| 1770057496 | 506 | 44 | 0 | 0 | 0 |
| 1770056595 | 507 | 44 | 0 | 0 | 0 |
| 1770055695 | 507 | 44 | 0 | 0 | 0 |
| 1770054795 | 507 | 44 | 0 | 0 | 0 |
| 1770053895 | 506 | 44 | 0 | 0 | 0 |
| 1770052995 | 506 | 38 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)