This is the latest recevied telemetry packets stored in our database for station/object IZ2FEB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1762049829 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1762048928 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762048027 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762047127 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762046226 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1762045326 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1762044426 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1762043526 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1762042626 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1762041726 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762040825 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762039925 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762039025 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762038124 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762037224 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762036324 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762035423 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762034523 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1762033623 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762032723 | 4.21 VDC | 0 | 0 | 0 | 0 |
| 1762031823 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1762030923 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1762030023 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1762029122 | 4.22 VDC | 0 | 0 | 0 | 0 |
| 1762028221 | 4.21 VDC | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)