This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1757336296 | 319 Count | 405 Count | 275 Count | 4.06 VDC | 5.56 VDC |
| 1757334497 | 310 Count | 392 Count | 267 Count | 4.06 VDC | 5.56 VDC |
| 1757332699 | 299 Count | 378 Count | 257 Count | 4.06 VDC | 5.56 VDC |
| 1757330903 | 289 Count | 367 Count | 248 Count | 4.07 VDC | 5.56 VDC |
| 1757330527 | 282 Count | 365 Count | 246 Count | 4.07 VDC | 5.56 VDC |
| 1757328730 | 274 Count | 355 Count | 239 Count | 4.06 VDC | 5.56 VDC |
| 1757326932 | 264 Count | 344 Count | 230 Count | 4.07 VDC | 5.56 VDC |
| 1757325134 | 255 Count | 333 Count | 222 Count | 4.06 VDC | 5.56 VDC |
| 1757323336 | 247 Count | 321 Count | 215 Count | 4.08 VDC | 5.54 VDC |
| 1757321538 | 238 Count | 309 Count | 207 Count | 4.08 VDC | 5.56 VDC |
| 1757319741 | 218 Count | 288 Count | 189 Count | 4.08 VDC | 5.54 VDC |
| 1757317943 | 197 Count | 266 Count | 172 Count | 4.07 VDC | 5.54 VDC |
| 1757316146 | 188 Count | 256 Count | 164 Count | 4.08 VDC | 5.52 VDC |
| 1757314348 | 179 Count | 245 Count | 156 Count | 4.08 VDC | 5.54 VDC |
| 1757310753 | 161 Count | 220 Count | 140 Count | 4.09 VDC | 4.42 VDC |
| 1757308956 | 155 Count | 211 Count | 135 Count | 4.08 VDC | 4.42 VDC |
| 1757307159 | 149 Count | 205 Count | 130 Count | 4.07 VDC | 4.44 VDC |
| 1757305362 | 143 Count | 199 Count | 125 Count | 4.07 VDC | 4.2 VDC |
| 1757303565 | 137 Count | 193 Count | 120 Count | 4.07 VDC | 0 VDC |
| 1757301768 | 130 Count | 185 Count | 114 Count | 4.07 VDC | 0 VDC |
| 1757299973 | 123 Count | 176 Count | 108 Count | 4.08 VDC | 0 VDC |
| 1757298175 | 116 Count | 166 Count | 102 Count | 4.08 VDC | 0 VDC |
| 1757296377 | 109 Count | 156 Count | 96 Count | 4.08 VDC | 0 VDC |
| 1757294579 | 102 Count | 146 Count | 90 Count | 4.08 VDC | 0 VDC |
| 1757292781 | 95 Count | 135 Count | 84 Count | 4.08 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)