This is the latest recevied telemetry packets stored in our database for station/object DG1MJG-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783257714 | 358 Count | 917 Count | 0 Count | 0 VDC | 0 VDC |
| 1783257111 | 357 Count | 916 Count | 0 Count | 0 VDC | 0 VDC |
| 1783256507 | 356 Count | 907 Count | 0 Count | 0 VDC | 0 VDC |
| 1783255904 | 355 Count | 905 Count | 0 Count | 0 VDC | 0 VDC |
| 1783255301 | 354 Count | 899 Count | 0 Count | 0 VDC | 0 VDC |
| 1783254697 | 353 Count | 887 Count | 0 Count | 0 VDC | 0 VDC |
| 1783254094 | 352 Count | 878 Count | 0 Count | 0 VDC | 0 VDC |
| 1783253491 | 351 Count | 868 Count | 0 Count | 0 VDC | 0 VDC |
| 1783252887 | 350 Count | 858 Count | 0 Count | 0 VDC | 0 VDC |
| 1783252284 | 349 Count | 849 Count | 0 Count | 0 VDC | 0 VDC |
| 1783251681 | 348 Count | 835 Count | 0 Count | 0 VDC | 0 VDC |
| 1783251077 | 347 Count | 830 Count | 0 Count | 0 VDC | 0 VDC |
| 1783250474 | 346 Count | 830 Count | 0 Count | 0 VDC | 0 VDC |
| 1783249871 | 345 Count | 830 Count | 0 Count | 0 VDC | 0 VDC |
| 1783249267 | 344 Count | 828 Count | 0 Count | 0 VDC | 0 VDC |
| 1783248664 | 343 Count | 824 Count | 0 Count | 0 VDC | 0 VDC |
| 1783248061 | 342 Count | 824 Count | 0 Count | 0 VDC | 0 VDC |
| 1783247458 | 341 Count | 823 Count | 0 Count | 0 VDC | 0 VDC |
| 1783246854 | 340 Count | 822 Count | 0 Count | 0 VDC | 0 VDC |
| 1783246251 | 339 Count | 821 Count | 0 Count | 0 VDC | 0 VDC |
| 1783245647 | 338 Count | 819 Count | 0 Count | 0 VDC | 0 VDC |
| 1783245044 | 336 Count | 818 Count | 0 Count | 0 VDC | 0 VDC |
| 1783244441 | 335 Count | 818 Count | 0 Count | 0 VDC | 0 VDC |
| 1783243838 | 333 Count | 818 Count | 0 Count | 0 VDC | 0 VDC |
| 1783243235 | 332 Count | 818 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)