This is the latest recevied telemetry packets stored in our database for station/object SQ9WRT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783233403 | 83 Count | 535 Count | 37 Count | 0 VDC | 0 VDC |
| 1783230701 | 77 Count | 488 Count | 34 Count | 0 VDC | 0 VDC |
| 1783228001 | 71 Count | 445 Count | 31 Count | 0 VDC | 0 VDC |
| 1783227097 | 69 Count | 430 Count | 30 Count | 0 VDC | 0 VDC |
| 1783223518 | 57 Count | 381 Count | 26 Count | 0 VDC | 0 VDC |
| 1783222616 | 55 Count | 367 Count | 25 Count | 0 VDC | 0 VDC |
| 1783219913 | 49 Count | 330 Count | 22 Count | 0 VDC | 0 VDC |
| 1783219014 | 47 Count | 318 Count | 21 Count | 0 VDC | 0 VDC |
| 1783218112 | 45 Count | 307 Count | 20 Count | 0 VDC | 0 VDC |
| 1783215408 | 39 Count | 266 Count | 17 Count | 0 VDC | 0 VDC |
| 1783214507 | 37 Count | 253 Count | 16 Count | 0 VDC | 0 VDC |
| 1783213607 | 35 Count | 238 Count | 15 Count | 0 VDC | 0 VDC |
| 1783212705 | 33 Count | 224 Count | 14 Count | 0 VDC | 0 VDC |
| 1783211803 | 31 Count | 210 Count | 13 Count | 0 VDC | 0 VDC |
| 1783209100 | 26 Count | 164 Count | 11 Count | 0 VDC | 0 VDC |
| 1783208201 | 24 Count | 147 Count | 10 Count | 0 VDC | 0 VDC |
| 1783207298 | 22 Count | 131 Count | 9 Count | 0 VDC | 0 VDC |
| 1783205496 | 18 Count | 103 Count | 7 Count | 0 VDC | 0 VDC |
| 1783189294 | 211 Count | 864 Count | 157 Count | 0 VDC | 0 VDC |
| 1783188393 | 198 Count | 835 Count | 145 Count | 0 VDC | 0 VDC |
| 1783187491 | 186 Count | 807 Count | 134 Count | 0 VDC | 0 VDC |
| 1783185690 | 163 Count | 749 Count | 113 Count | 0 VDC | 0 VDC |
| 1783183888 | 155 Count | 715 Count | 107 Count | 0 VDC | 0 VDC |
| 1783182113 | 147 Count | 678 Count | 105 Count | 0 VDC | 0 VDC |
| 1783180311 | 143 Count | 648 Count | 103 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)