This is the latest recevied telemetry packets stored in our database for station/object SR2ZXT-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768835922 | 468 | 1001 | 376 | 0 | 0 |
| 1768834121 | 453 | 979 | 362 | 0 | 0 |
| 1768832321 | 449 | 969 | 359 | 0 | 0 |
| 1768830520 | 436 | 950 | 347 | 0 | 0 |
| 1768828719 | 430 | 931 | 342 | 0 | 0 |
| 1768826919 | 417 | 912 | 330 | 0 | 0 |
| 1768825118 | 397 | 881 | 311 | 0 | 0 |
| 1768823317 | 393 | 872 | 308 | 0 | 0 |
| 1768821517 | 388 | 862 | 304 | 0 | 0 |
| 1768819716 | 382 | 851 | 299 | 0 | 0 |
| 1768817915 | 376 | 840 | 294 | 0 | 0 |
| 1768814322 | 353 | 805 | 273 | 0 | 0 |
| 1768812521 | 348 | 794 | 269 | 0 | 0 |
| 1768810721 | 344 | 784 | 266 | 0 | 0 |
| 1768808920 | 337 | 772 | 260 | 0 | 0 |
| 1768807119 | 320 | 741 | 244 | 0 | 0 |
| 1768805319 | 316 | 733 | 241 | 0 | 0 |
| 1768803518 | 312 | 719 | 238 | 0 | 0 |
| 1768801717 | 308 | 710 | 235 | 0 | 0 |
| 1768799917 | 304 | 701 | 232 | 0 | 0 |
| 1768798115 | 300 | 692 | 229 | 0 | 0 |
| 1768796314 | 296 | 683 | 226 | 0 | 0 |
| 1768794514 | 290 | 672 | 221 | 0 | 0 |
| 1768792721 | 286 | 663 | 218 | 0 | 0 |
| 1768790920 | 282 | 654 | 215 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)