This is the latest recevied telemetry packets stored in our database for station/object SP4WSL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792878423 | 774 Count | 969 Count | 683 Count | 0 VDC | 0 VDC |
| 1792876622 | 753 Count | 942 Count | 663 Count | 0 VDC | 0 VDC |
| 1792874829 | 737 Count | 917 Count | 648 Count | 0 VDC | 0 VDC |
| 1792873029 | 719 Count | 892 Count | 631 Count | 0 VDC | 0 VDC |
| 1792871228 | 701 Count | 867 Count | 614 Count | 0 VDC | 0 VDC |
| 1792869427 | 692 Count | 857 Count | 606 Count | 0 VDC | 0 VDC |
| 1792867626 | 686 Count | 852 Count | 601 Count | 0 VDC | 0 VDC |
| 1792865826 | 680 Count | 847 Count | 596 Count | 0 VDC | 0 VDC |
| 1792864025 | 674 Count | 841 Count | 591 Count | 0 VDC | 0 VDC |
| 1792862224 | 665 Count | 832 Count | 583 Count | 0 VDC | 0 VDC |
| 1792860423 | 644 Count | 806 Count | 563 Count | 0 VDC | 0 VDC |
| 1792858623 | 626 Count | 785 Count | 546 Count | 0 VDC | 0 VDC |
| 1792856822 | 620 Count | 780 Count | 541 Count | 0 VDC | 0 VDC |
| 1792855021 | 614 Count | 775 Count | 536 Count | 0 VDC | 0 VDC |
| 1792853233 | 608 Count | 770 Count | 531 Count | 0 VDC | 0 VDC |
| 1792851432 | 602 Count | 764 Count | 526 Count | 0 VDC | 0 VDC |
| 1792849632 | 596 Count | 759 Count | 521 Count | 0 VDC | 0 VDC |
| 1792847831 | 591 Count | 754 Count | 517 Count | 0 VDC | 0 VDC |
| 1792846030 | 585 Count | 747 Count | 512 Count | 0 VDC | 0 VDC |
| 1792844230 | 579 Count | 739 Count | 507 Count | 0 VDC | 0 VDC |
| 1792842429 | 573 Count | 733 Count | 502 Count | 0 VDC | 0 VDC |
| 1792840628 | 567 Count | 728 Count | 497 Count | 0 VDC | 0 VDC |
| 1792838828 | 561 Count | 722 Count | 492 Count | 0 VDC | 0 VDC |
| 1792837027 | 555 Count | 715 Count | 487 Count | 0 VDC | 0 VDC |
| 1792835226 | 549 Count | 708 Count | 482 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)