This is the latest recevied telemetry packets stored in our database for station/object SP9LJE-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1777398563 | 141 Count | 197 Count | 130 Count | 0 VDC | 0 VDC |
| 1777396763 | 130 Count | 187 Count | 120 Count | 0 VDC | 0 VDC |
| 1777394962 | 119 Count | 177 Count | 110 Count | 0 VDC | 0 VDC |
| 1777393162 | 108 Count | 166 Count | 100 Count | 0 VDC | 0 VDC |
| 1777391361 | 95 Count | 145 Count | 88 Count | 0 VDC | 0 VDC |
| 1777389560 | 84 Count | 126 Count | 78 Count | 0 VDC | 0 VDC |
| 1777387760 | 72 Count | 110 Count | 67 Count | 0 VDC | 0 VDC |
| 1777385959 | 59 Count | 91 Count | 55 Count | 0 VDC | 0 VDC |
| 1777384158 | 49 Count | 76 Count | 46 Count | 0 VDC | 0 VDC |
| 1777382358 | 38 Count | 59 Count | 36 Count | 0 VDC | 0 VDC |
| 1777380557 | 22 Count | 29 Count | 21 Count | 0 VDC | 0 VDC |
| 1777378756 | 10 Count | 14 Count | 10 Count | 0 VDC | 0 VDC |
| 1777376964 | 1000 Count | 923 Count | 905 Count | 0 VDC | 0 VDC |
| 1777375163 | 987 Count | 907 Count | 893 Count | 0 VDC | 0 VDC |
| 1777373363 | 964 Count | 883 Count | 871 Count | 0 VDC | 0 VDC |
| 1777371560 | 956 Count | 875 Count | 864 Count | 0 VDC | 0 VDC |
| 1777369760 | 951 Count | 871 Count | 860 Count | 0 VDC | 0 VDC |
| 1777367959 | 950 Count | 871 Count | 860 Count | 0 VDC | 0 VDC |
| 1777366158 | 947 Count | 869 Count | 858 Count | 0 VDC | 0 VDC |
| 1777364358 | 932 Count | 855 Count | 844 Count | 0 VDC | 0 VDC |
| 1777362557 | 922 Count | 846 Count | 835 Count | 0 VDC | 0 VDC |
| 1777360757 | 911 Count | 836 Count | 825 Count | 0 VDC | 0 VDC |
| 1777358956 | 900 Count | 826 Count | 815 Count | 0 VDC | 0 VDC |
| 1777357155 | 885 Count | 812 Count | 801 Count | 0 VDC | 0 VDC |
| 1777355362 | 873 Count | 801 Count | 790 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)