This is the latest recevied telemetry packets stored in our database for station/object SR7NSI-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774477049 | 651 Count | 851 Count | 32 Count | 0 VDC | 0 VDC |
| 1774476448 | 650 Count | 850 Count | 32 Count | 0 VDC | 0 VDC |
| 1774475847 | 649 Count | 850 Count | 32 Count | 0 VDC | 0 VDC |
| 1774475246 | 648 Count | 849 Count | 32 Count | 0 VDC | 0 VDC |
| 1774474645 | 647 Count | 848 Count | 32 Count | 0 VDC | 0 VDC |
| 1774474045 | 646 Count | 847 Count | 32 Count | 0 VDC | 0 VDC |
| 1774473444 | 645 Count | 846 Count | 32 Count | 0 VDC | 0 VDC |
| 1774472843 | 644 Count | 845 Count | 32 Count | 0 VDC | 0 VDC |
| 1774472242 | 643 Count | 844 Count | 32 Count | 0 VDC | 0 VDC |
| 1774471641 | 642 Count | 843 Count | 32 Count | 0 VDC | 0 VDC |
| 1774471041 | 641 Count | 842 Count | 32 Count | 0 VDC | 0 VDC |
| 1774470439 | 640 Count | 841 Count | 32 Count | 0 VDC | 0 VDC |
| 1774469838 | 639 Count | 840 Count | 32 Count | 0 VDC | 0 VDC |
| 1774469242 | 638 Count | 839 Count | 32 Count | 0 VDC | 0 VDC |
| 1774460255 | 619 Count | 827 Count | 32 Count | 0 VDC | 0 VDC |
| 1774459655 | 618 Count | 826 Count | 32 Count | 0 VDC | 0 VDC |
| 1774459056 | 617 Count | 826 Count | 32 Count | 0 VDC | 0 VDC |
| 1774458453 | 616 Count | 825 Count | 32 Count | 0 VDC | 0 VDC |
| 1774457852 | 615 Count | 825 Count | 32 Count | 0 VDC | 0 VDC |
| 1774457251 | 614 Count | 824 Count | 32 Count | 0 VDC | 0 VDC |
| 1774456650 | 613 Count | 823 Count | 32 Count | 0 VDC | 0 VDC |
| 1774456049 | 612 Count | 819 Count | 32 Count | 0 VDC | 0 VDC |
| 1774455449 | 611 Count | 819 Count | 32 Count | 0 VDC | 0 VDC |
| 1774454848 | 610 Count | 818 Count | 32 Count | 0 VDC | 0 VDC |
| 1774454247 | 609 Count | 817 Count | 32 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)