This is the latest recevied telemetry packets stored in our database for station/object SP2ROC-14. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778689882 | 160 Count | 465 Count | 118 Count | 0 VDC | 0 VDC |
| 1778689462 | 156 Count | 455 Count | 115 Count | 0 VDC | 0 VDC |
| 1778689041 | 150 Count | 441 Count | 110 Count | 0 VDC | 0 VDC |
| 1778688620 | 145 Count | 428 Count | 106 Count | 0 VDC | 0 VDC |
| 1778688200 | 142 Count | 417 Count | 104 Count | 0 VDC | 0 VDC |
| 1778687779 | 138 Count | 408 Count | 101 Count | 0 VDC | 0 VDC |
| 1778687358 | 136 Count | 400 Count | 100 Count | 0 VDC | 0 VDC |
| 1778686938 | 131 Count | 384 Count | 96 Count | 0 VDC | 0 VDC |
| 1778686517 | 128 Count | 375 Count | 94 Count | 0 VDC | 0 VDC |
| 1778686097 | 124 Count | 368 Count | 91 Count | 0 VDC | 0 VDC |
| 1778685676 | 120 Count | 360 Count | 88 Count | 0 VDC | 0 VDC |
| 1778685256 | 113 Count | 348 Count | 82 Count | 0 VDC | 0 VDC |
| 1778684835 | 111 Count | 344 Count | 81 Count | 0 VDC | 0 VDC |
| 1778684414 | 107 Count | 336 Count | 78 Count | 0 VDC | 0 VDC |
| 1778683994 | 104 Count | 330 Count | 76 Count | 0 VDC | 0 VDC |
| 1778683573 | 100 Count | 322 Count | 73 Count | 0 VDC | 0 VDC |
| 1778683152 | 96 Count | 312 Count | 70 Count | 0 VDC | 0 VDC |
| 1778682732 | 93 Count | 304 Count | 68 Count | 0 VDC | 0 VDC |
| 1778682311 | 87 Count | 285 Count | 63 Count | 0 VDC | 0 VDC |
| 1778681891 | 84 Count | 280 Count | 61 Count | 0 VDC | 0 VDC |
| 1778681469 | 80 Count | 268 Count | 58 Count | 0 VDC | 0 VDC |
| 1778681048 | 78 Count | 258 Count | 57 Count | 0 VDC | 0 VDC |
| 1778680628 | 75 Count | 248 Count | 55 Count | 0 VDC | 0 VDC |
| 1778680207 | 72 Count | 241 Count | 53 Count | 0 VDC | 0 VDC |
| 1778679787 | 67 Count | 231 Count | 49 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)