This is the latest recevied telemetry packets stored in our database for station/object SP6RSP-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781330256 | 279 Count | 1012 Count | 170 Count | 0 VDC | 0 VDC |
| 1781329655 | 271 Count | 980 Count | 165 Count | 0 VDC | 0 VDC |
| 1781329055 | 261 Count | 949 Count | 159 Count | 0 VDC | 0 VDC |
| 1781328454 | 253 Count | 906 Count | 155 Count | 0 VDC | 0 VDC |
| 1781327853 | 240 Count | 849 Count | 145 Count | 0 VDC | 0 VDC |
| 1781327252 | 230 Count | 804 Count | 139 Count | 0 VDC | 0 VDC |
| 1781326652 | 221 Count | 779 Count | 134 Count | 0 VDC | 0 VDC |
| 1781326051 | 213 Count | 748 Count | 129 Count | 0 VDC | 0 VDC |
| 1781325451 | 203 Count | 715 Count | 123 Count | 0 VDC | 0 VDC |
| 1781324874 | 193 Count | 689 Count | 117 Count | 0 VDC | 0 VDC |
| 1781324274 | 183 Count | 649 Count | 110 Count | 0 VDC | 0 VDC |
| 1781323673 | 176 Count | 622 Count | 107 Count | 0 VDC | 0 VDC |
| 1781323072 | 165 Count | 599 Count | 100 Count | 0 VDC | 0 VDC |
| 1781322472 | 154 Count | 561 Count | 92 Count | 0 VDC | 0 VDC |
| 1781321871 | 144 Count | 529 Count | 86 Count | 0 VDC | 0 VDC |
| 1781321271 | 136 Count | 509 Count | 82 Count | 0 VDC | 0 VDC |
| 1781320670 | 126 Count | 466 Count | 75 Count | 0 VDC | 0 VDC |
| 1781320069 | 117 Count | 429 Count | 70 Count | 0 VDC | 0 VDC |
| 1781319468 | 110 Count | 409 Count | 67 Count | 0 VDC | 0 VDC |
| 1781318867 | 102 Count | 376 Count | 62 Count | 0 VDC | 0 VDC |
| 1781318267 | 92 Count | 344 Count | 56 Count | 0 VDC | 0 VDC |
| 1781317666 | 83 Count | 318 Count | 51 Count | 0 VDC | 0 VDC |
| 1781317065 | 74 Count | 287 Count | 45 Count | 0 VDC | 0 VDC |
| 1781316464 | 65 Count | 253 Count | 40 Count | 0 VDC | 0 VDC |
| 1781315864 | 57 Count | 226 Count | 36 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)