This is the latest recevied telemetry packets stored in our database for station/object SQ5CZL-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785419335 | 372 Count | 558 Count | 260 Count | 0 VDC | 0 VDC |
| 1785418434 | 369 Count | 555 Count | 258 Count | 0 VDC | 0 VDC |
| 1785417533 | 365 Count | 550 Count | 255 Count | 0 VDC | 0 VDC |
| 1785416632 | 362 Count | 546 Count | 253 Count | 0 VDC | 0 VDC |
| 1785415730 | 358 Count | 541 Count | 250 Count | 0 VDC | 0 VDC |
| 1785414829 | 355 Count | 537 Count | 248 Count | 0 VDC | 0 VDC |
| 1785413928 | 351 Count | 532 Count | 245 Count | 0 VDC | 0 VDC |
| 1785413057 | 348 Count | 528 Count | 243 Count | 0 VDC | 0 VDC |
| 1785412155 | 345 Count | 524 Count | 241 Count | 0 VDC | 0 VDC |
| 1785411254 | 342 Count | 520 Count | 239 Count | 0 VDC | 0 VDC |
| 1785410353 | 339 Count | 516 Count | 237 Count | 0 VDC | 0 VDC |
| 1785409452 | 336 Count | 512 Count | 235 Count | 0 VDC | 0 VDC |
| 1785408550 | 333 Count | 508 Count | 233 Count | 0 VDC | 0 VDC |
| 1785407649 | 330 Count | 504 Count | 231 Count | 0 VDC | 0 VDC |
| 1785406748 | 327 Count | 500 Count | 229 Count | 0 VDC | 0 VDC |
| 1785405847 | 324 Count | 496 Count | 227 Count | 0 VDC | 0 VDC |
| 1785404945 | 321 Count | 492 Count | 225 Count | 0 VDC | 0 VDC |
| 1785404044 | 318 Count | 488 Count | 223 Count | 0 VDC | 0 VDC |
| 1785403142 | 315 Count | 484 Count | 221 Count | 0 VDC | 0 VDC |
| 1785402241 | 312 Count | 480 Count | 219 Count | 0 VDC | 0 VDC |
| 1785401340 | 309 Count | 477 Count | 217 Count | 0 VDC | 0 VDC |
| 1785400439 | 305 Count | 472 Count | 214 Count | 0 VDC | 0 VDC |
| 1785399537 | 303 Count | 469 Count | 213 Count | 0 VDC | 0 VDC |
| 1785398636 | 300 Count | 465 Count | 211 Count | 0 VDC | 0 VDC |
| 1785397735 | 297 Count | 461 Count | 209 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)