This is the latest recevied telemetry packets stored in our database for station/object SP2BYD-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781391532 | 159 Count | 566 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1781391232 | 158 Count | 560 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1781390933 | 157 Count | 555 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1781390632 | 156 Count | 553 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1781390333 | 155 Count | 550 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1781390033 | 154 Count | 540 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781389733 | 153 Count | 536 Count | 0 Count | 4.09 VDC | 0 VDC |
| 1781389434 | 152 Count | 531 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781389133 | 151 Count | 526 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781388834 | 150 Count | 525 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781388534 | 149 Count | 520 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781388233 | 148 Count | 514 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781387934 | 147 Count | 510 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781387634 | 146 Count | 503 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781387333 | 145 Count | 500 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781387033 | 144 Count | 500 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781386733 | 143 Count | 492 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781386433 | 142 Count | 487 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781386134 | 141 Count | 485 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781385833 | 140 Count | 479 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781385533 | 139 Count | 475 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781385234 | 138 Count | 472 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781384934 | 137 Count | 466 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781384634 | 136 Count | 463 Count | 0 Count | 4.1 VDC | 0 VDC |
| 1781384334 | 135 Count | 460 Count | 0 Count | 4.1 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)