This is the latest recevied telemetry packets stored in our database for station/object F4GCF-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774425926 | 0 Count | 575 Count | 169 Count | 0 VDC | 0 VDC |
| 1774425326 | 0 Count | 551 Count | 161 Count | 0 VDC | 0 VDC |
| 1774424726 | 0 Count | 536 Count | 156 Count | 0 VDC | 0 VDC |
| 1774424126 | 0 Count | 524 Count | 154 Count | 0 VDC | 0 VDC |
| 1774423526 | 0 Count | 508 Count | 149 Count | 0 VDC | 0 VDC |
| 1774422925 | 0 Count | 494 Count | 145 Count | 0 VDC | 0 VDC |
| 1774422325 | 0 Count | 479 Count | 141 Count | 0 VDC | 0 VDC |
| 1774421725 | 0 Count | 464 Count | 134 Count | 0 VDC | 0 VDC |
| 1774421125 | 0 Count | 452 Count | 129 Count | 0 VDC | 0 VDC |
| 1774420525 | 0 Count | 441 Count | 127 Count | 0 VDC | 0 VDC |
| 1774419925 | 0 Count | 418 Count | 120 Count | 0 VDC | 0 VDC |
| 1774419325 | 0 Count | 396 Count | 115 Count | 0 VDC | 0 VDC |
| 1774418725 | 0 Count | 386 Count | 113 Count | 0 VDC | 0 VDC |
| 1774418125 | 0 Count | 370 Count | 107 Count | 0 VDC | 0 VDC |
| 1774417525 | 0 Count | 357 Count | 103 Count | 0 VDC | 0 VDC |
| 1774416924 | 0 Count | 347 Count | 99 Count | 0 VDC | 0 VDC |
| 1774416324 | 0 Count | 332 Count | 95 Count | 0 VDC | 0 VDC |
| 1774415724 | 0 Count | 317 Count | 91 Count | 0 VDC | 0 VDC |
| 1774415124 | 0 Count | 302 Count | 87 Count | 0 VDC | 0 VDC |
| 1774414524 | 0 Count | 278 Count | 80 Count | 0 VDC | 0 VDC |
| 1774413924 | 0 Count | 257 Count | 74 Count | 0 VDC | 0 VDC |
| 1774413324 | 0 Count | 237 Count | 71 Count | 0 VDC | 0 VDC |
| 1774412724 | 0 Count | 218 Count | 68 Count | 0 VDC | 0 VDC |
| 1774412123 | 0 Count | 210 Count | 65 Count | 0 VDC | 0 VDC |
| 1774411523 | 0 Count | 198 Count | 62 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)