This is the latest recevied telemetry packets stored in our database for station/object SQ2WIT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791158073 | 368 Count | 762 Count | 338 Count | 0 VDC | 0 VDC |
| 1791157173 | 359 Count | 738 Count | 330 Count | 0 VDC | 0 VDC |
| 1791156272 | 343 Count | 706 Count | 315 Count | 0 VDC | 0 VDC |
| 1791155371 | 335 Count | 682 Count | 308 Count | 0 VDC | 0 VDC |
| 1791154471 | 319 Count | 652 Count | 293 Count | 0 VDC | 0 VDC |
| 1791153570 | 310 Count | 634 Count | 285 Count | 0 VDC | 0 VDC |
| 1791152669 | 297 Count | 607 Count | 273 Count | 0 VDC | 0 VDC |
| 1791151769 | 289 Count | 593 Count | 266 Count | 0 VDC | 0 VDC |
| 1791150868 | 277 Count | 567 Count | 255 Count | 0 VDC | 0 VDC |
| 1791149967 | 267 Count | 553 Count | 246 Count | 0 VDC | 0 VDC |
| 1791149067 | 255 Count | 530 Count | 235 Count | 0 VDC | 0 VDC |
| 1791148166 | 245 Count | 514 Count | 226 Count | 0 VDC | 0 VDC |
| 1791147280 | 229 Count | 486 Count | 215 Count | 0 VDC | 0 VDC |
| 1791146380 | 212 Count | 457 Count | 199 Count | 0 VDC | 0 VDC |
| 1791145479 | 185 Count | 418 Count | 173 Count | 0 VDC | 0 VDC |
| 1791144578 | 164 Count | 381 Count | 153 Count | 0 VDC | 0 VDC |
| 1791143678 | 147 Count | 346 Count | 137 Count | 0 VDC | 0 VDC |
| 1791142777 | 136 Count | 323 Count | 127 Count | 0 VDC | 0 VDC |
| 1791141876 | 122 Count | 291 Count | 114 Count | 0 VDC | 0 VDC |
| 1791140976 | 106 Count | 258 Count | 99 Count | 0 VDC | 0 VDC |
| 1791140075 | 85 Count | 224 Count | 79 Count | 0 VDC | 0 VDC |
| 1791139174 | 73 Count | 197 Count | 68 Count | 0 VDC | 0 VDC |
| 1791138274 | 58 Count | 155 Count | 54 Count | 0 VDC | 0 VDC |
| 1791137373 | 46 Count | 121 Count | 43 Count | 0 VDC | 0 VDC |
| 1791136473 | 30 Count | 81 Count | 28 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)