This is the latest recevied telemetry packets stored in our database for station/object EA5DHO-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1762075091 | 0 Count | 558 Count | 0 Count | 0 VDC | 0 VDC |
| 1762073951 | 0 Count | 558 Count | 0 Count | 0 VDC | 0 VDC |
| 1762072811 | 0 Count | 530 Count | 0 Count | 0 VDC | 0 VDC |
| 1762071671 | 0 Count | 492 Count | 0 Count | 0 VDC | 0 VDC |
| 1762070531 | 0 Count | 461 Count | 0 Count | 0 VDC | 0 VDC |
| 1762069391 | 0 Count | 461 Count | 0 Count | 0 VDC | 0 VDC |
| 1762068251 | 0 Count | 461 Count | 0 Count | 0 VDC | 0 VDC |
| 1762067111 | 0 Count | 457 Count | 0 Count | 0 VDC | 0 VDC |
| 1762065971 | 0 Count | 457 Count | 0 Count | 0 VDC | 0 VDC |
| 1762064831 | 0 Count | 457 Count | 0 Count | 0 VDC | 0 VDC |
| 1762063691 | 0 Count | 457 Count | 0 Count | 0 VDC | 0 VDC |
| 1762062551 | 0 Count | 457 Count | 0 Count | 0 VDC | 0 VDC |
| 1762061412 | 0 Count | 457 Count | 0 Count | 0 VDC | 0 VDC |
| 1762034182 | 0 Count | 457 Count | 0 Count | 0 VDC | 0 VDC |
| 1762033042 | 0 Count | 431 Count | 0 Count | 0 VDC | 0 VDC |
| 1762031901 | 0 Count | 384 Count | 0 Count | 0 VDC | 0 VDC |
| 1762030761 | 0 Count | 342 Count | 0 Count | 0 VDC | 0 VDC |
| 1762029621 | 0 Count | 298 Count | 0 Count | 0 VDC | 0 VDC |
| 1762028481 | 0 Count | 259 Count | 0 Count | 0 VDC | 0 VDC |
| 1762027341 | 0 Count | 227 Count | 0 Count | 0 VDC | 0 VDC |
| 1762026201 | 0 Count | 190 Count | 0 Count | 0 VDC | 0 VDC |
| 1762025061 | 0 Count | 183 Count | 0 Count | 0 VDC | 0 VDC |
| 1762023921 | 0 Count | 176 Count | 0 Count | 0 VDC | 0 VDC |
| 1762022781 | 0 Count | 173 Count | 0 Count | 0 VDC | 0 VDC |
| 1762021641 | 0 Count | 129 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)