This is the latest recevied telemetry packets stored in our database for station/object PA1MT-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1773464173 | 316 Count | 710 Count | 0 Count | 0 VDC | 0 VDC |
| 1773462370 | 315 Count | 708 Count | 0 Count | 0 VDC | 0 VDC |
| 1773460566 | 314 Count | 705 Count | 0 Count | 0 VDC | 0 VDC |
| 1773458763 | 313 Count | 702 Count | 0 Count | 0 VDC | 0 VDC |
| 1773456960 | 312 Count | 699 Count | 0 Count | 0 VDC | 0 VDC |
| 1773455194 | 307 Count | 696 Count | 0 Count | 0 VDC | 0 VDC |
| 1773453391 | 306 Count | 693 Count | 0 Count | 0 VDC | 0 VDC |
| 1773451587 | 305 Count | 690 Count | 0 Count | 0 VDC | 0 VDC |
| 1773449784 | 304 Count | 687 Count | 0 Count | 0 VDC | 0 VDC |
| 1773447980 | 303 Count | 684 Count | 0 Count | 0 VDC | 0 VDC |
| 1773446177 | 302 Count | 681 Count | 0 Count | 0 VDC | 0 VDC |
| 1773444374 | 301 Count | 678 Count | 0 Count | 0 VDC | 0 VDC |
| 1773442570 | 300 Count | 675 Count | 0 Count | 0 VDC | 0 VDC |
| 1773440767 | 299 Count | 672 Count | 0 Count | 0 VDC | 0 VDC |
| 1773438964 | 298 Count | 669 Count | 0 Count | 0 VDC | 0 VDC |
| 1773437160 | 297 Count | 666 Count | 0 Count | 0 VDC | 0 VDC |
| 1773435357 | 296 Count | 663 Count | 0 Count | 0 VDC | 0 VDC |
| 1773433591 | 291 Count | 660 Count | 0 Count | 0 VDC | 0 VDC |
| 1773431788 | 290 Count | 657 Count | 0 Count | 0 VDC | 0 VDC |
| 1773429985 | 289 Count | 654 Count | 0 Count | 0 VDC | 0 VDC |
| 1773428181 | 288 Count | 651 Count | 0 Count | 0 VDC | 0 VDC |
| 1773426378 | 287 Count | 648 Count | 0 Count | 0 VDC | 0 VDC |
| 1773424575 | 286 Count | 645 Count | 0 Count | 0 VDC | 0 VDC |
| 1773422771 | 285 Count | 642 Count | 0 Count | 0 VDC | 0 VDC |
| 1773420968 | 284 Count | 639 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)