This is the latest recevied telemetry packets stored in our database for station/object CR7BQX-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774382584 | 825 Count | 354 Count | 354 Count | 4.18 VDC | 0.14 VDC |
| 1774380778 | 821 Count | 352 Count | 352 Count | 4.17 VDC | 0.14 VDC |
| 1774379040 | 813 Count | 350 Count | 350 Count | 4.18 VDC | 0.14 VDC |
| 1774377235 | 809 Count | 348 Count | 348 Count | 4.16 VDC | 0.14 VDC |
| 1774375429 | 805 Count | 346 Count | 346 Count | 4.17 VDC | 0.14 VDC |
| 1774373623 | 801 Count | 344 Count | 344 Count | 4.16 VDC | 0.14 VDC |
| 1774371817 | 797 Count | 342 Count | 342 Count | 4.19 VDC | 0.14 VDC |
| 1774370012 | 793 Count | 340 Count | 340 Count | 4.21 VDC | 0.14 VDC |
| 1774368206 | 789 Count | 338 Count | 338 Count | 4.18 VDC | 0.14 VDC |
| 1774366400 | 785 Count | 336 Count | 336 Count | 4.14 VDC | 0.14 VDC |
| 1774364595 | 781 Count | 334 Count | 334 Count | 4.18 VDC | 0.14 VDC |
| 1774362789 | 777 Count | 332 Count | 332 Count | 4.17 VDC | 0.14 VDC |
| 1774360983 | 773 Count | 330 Count | 330 Count | 4.22 VDC | 0.14 VDC |
| 1774352541 | 756 Count | 327 Count | 327 Count | 4.14 VDC | 0.14 VDC |
| 1774350736 | 752 Count | 325 Count | 325 Count | 4.24 VDC | 0.14 VDC |
| 1774284618 | 747 Count | 325 Count | 325 Count | 4.23 VDC | 0.14 VDC |
| 1774282813 | 743 Count | 323 Count | 323 Count | 4.13 VDC | 0.14 VDC |
| 1774281006 | 739 Count | 321 Count | 321 Count | 4.18 VDC | 0.14 VDC |
| 1774279200 | 735 Count | 319 Count | 319 Count | 4.23 VDC | 0.14 VDC |
| 1774277395 | 731 Count | 317 Count | 317 Count | 4.19 VDC | 0.14 VDC |
| 1774275589 | 727 Count | 315 Count | 315 Count | 4.14 VDC | 0.14 VDC |
| 1774273784 | 723 Count | 313 Count | 313 Count | 4.18 VDC | 0.14 VDC |
| 1774177945 | 632 Count | 275 Count | 275 Count | 4.13 VDC | 0.14 VDC |
| 1774098185 | 625 Count | 274 Count | 274 Count | 4.17 VDC | 0.14 VDC |
| 1774096380 | 621 Count | 272 Count | 272 Count | 4.18 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)