This is the latest recevied telemetry packets stored in our database for station/object SP8SD-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788972635 | 546 Count | 449 Count | 404 Count | 0.28 VDC | 3.14 VDC |
| 1788972335 | 543 Count | 446 Count | 402 Count | 0.28 VDC | 3.14 VDC |
| 1788972034 | 537 Count | 441 Count | 397 Count | 0.28 VDC | 3.14 VDC |
| 1788971733 | 534 Count | 439 Count | 395 Count | 0.28 VDC | 3.14 VDC |
| 1788971433 | 531 Count | 436 Count | 393 Count | 0.28 VDC | 2.98 VDC |
| 1788971132 | 525 Count | 431 Count | 388 Count | 0.28 VDC | 3.14 VDC |
| 1788970831 | 522 Count | 429 Count | 386 Count | 0.28 VDC | 3.14 VDC |
| 1788970531 | 519 Count | 426 Count | 384 Count | 0.28 VDC | 1.76 VDC |
| 1788970230 | 513 Count | 421 Count | 379 Count | 0.28 VDC | 3.14 VDC |
| 1788969930 | 511 Count | 420 Count | 378 Count | 0.28 VDC | 3.14 VDC |
| 1788969629 | 508 Count | 417 Count | 376 Count | 0.28 VDC | 3.14 VDC |
| 1788969328 | 505 Count | 415 Count | 374 Count | 0.28 VDC | 3.14 VDC |
| 1788969027 | 503 Count | 414 Count | 373 Count | 0.28 VDC | 1.68 VDC |
| 1788968727 | 500 Count | 411 Count | 371 Count | 0.28 VDC | 3.14 VDC |
| 1788968426 | 493 Count | 405 Count | 365 Count | 0.28 VDC | 3.14 VDC |
| 1788968126 | 490 Count | 403 Count | 363 Count | 0.28 VDC | 3.14 VDC |
| 1788967825 | 488 Count | 401 Count | 362 Count | 0.28 VDC | 3.14 VDC |
| 1788967524 | 481 Count | 395 Count | 356 Count | 0.28 VDC | 3.14 VDC |
| 1788967224 | 478 Count | 393 Count | 354 Count | 0.28 VDC | 3.14 VDC |
| 1788966918 | 474 Count | 389 Count | 351 Count | 0.28 VDC | 3.14 VDC |
| 1788966617 | 469 Count | 385 Count | 347 Count | 0.28 VDC | 3.14 VDC |
| 1788966316 | 466 Count | 383 Count | 345 Count | 0.28 VDC | 1.62 VDC |
| 1788965715 | 459 Count | 377 Count | 340 Count | 0.28 VDC | 3.14 VDC |
| 1788965414 | 456 Count | 375 Count | 338 Count | 0.28 VDC | 3.14 VDC |
| 1788965114 | 452 Count | 371 Count | 335 Count | 0.28 VDC | 1.52 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)