This is the latest recevied telemetry packets stored in our database for station/object SQ4VW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788988166 | 153 Count | 286 Count | 67 Count | 0 VDC | 0 VDC |
| 1788987866 | 150 Count | 279 Count | 66 Count | 0 VDC | 0 VDC |
| 1788987565 | 147 Count | 274 Count | 64 Count | 0 VDC | 0 VDC |
| 1788987264 | 145 Count | 272 Count | 64 Count | 0 VDC | 0 VDC |
| 1788986963 | 142 Count | 261 Count | 62 Count | 0 VDC | 0 VDC |
| 1788986663 | 139 Count | 260 Count | 61 Count | 0 VDC | 0 VDC |
| 1788986362 | 137 Count | 256 Count | 60 Count | 0 VDC | 0 VDC |
| 1788986061 | 134 Count | 248 Count | 59 Count | 0 VDC | 0 VDC |
| 1788985760 | 131 Count | 243 Count | 57 Count | 0 VDC | 0 VDC |
| 1788985460 | 129 Count | 242 Count | 57 Count | 0 VDC | 0 VDC |
| 1788985159 | 126 Count | 234 Count | 55 Count | 0 VDC | 0 VDC |
| 1788984858 | 123 Count | 233 Count | 54 Count | 0 VDC | 0 VDC |
| 1788984557 | 121 Count | 229 Count | 53 Count | 0 VDC | 0 VDC |
| 1788984257 | 118 Count | 220 Count | 52 Count | 0 VDC | 0 VDC |
| 1788984009 | 116 Count | 216 Count | 51 Count | 0 VDC | 0 VDC |
| 1788983709 | 115 Count | 214 Count | 51 Count | 0 VDC | 0 VDC |
| 1788983408 | 111 Count | 207 Count | 49 Count | 0 VDC | 0 VDC |
| 1788983107 | 109 Count | 205 Count | 48 Count | 0 VDC | 0 VDC |
| 1788982806 | 106 Count | 201 Count | 47 Count | 0 VDC | 0 VDC |
| 1788982506 | 104 Count | 192 Count | 46 Count | 0 VDC | 0 VDC |
| 1788982205 | 100 Count | 187 Count | 44 Count | 0 VDC | 0 VDC |
| 1788981904 | 99 Count | 186 Count | 44 Count | 0 VDC | 0 VDC |
| 1788981604 | 95 Count | 177 Count | 42 Count | 0 VDC | 0 VDC |
| 1788981303 | 93 Count | 175 Count | 41 Count | 0 VDC | 0 VDC |
| 1788981002 | 90 Count | 171 Count | 40 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)