This is the latest recevied telemetry packets stored in our database for station/object XE2AD-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1784055143 | 323 Count | 326 Count | 264 Count | 0 VDC | 0 VDC |
| 1784051536 | 313 Count | 317 Count | 256 Count | 0 VDC | 0 VDC |
| 1784049733 | 306 Count | 309 Count | 250 Count | 0 VDC | 0 VDC |
| 1784047929 | 302 Count | 304 Count | 247 Count | 0 VDC | 0 VDC |
| 1784046126 | 295 Count | 297 Count | 241 Count | 0 VDC | 0 VDC |
| 1784044323 | 289 Count | 291 Count | 236 Count | 0 VDC | 0 VDC |
| 1784040754 | 274 Count | 279 Count | 227 Count | 0 VDC | 0 VDC |
| 1784038950 | 251 Count | 254 Count | 205 Count | 0 VDC | 0 VDC |
| 1784035344 | 241 Count | 242 Count | 197 Count | 0 VDC | 0 VDC |
| 1784033540 | 235 Count | 235 Count | 192 Count | 0 VDC | 0 VDC |
| 1784031737 | 232 Count | 231 Count | 190 Count | 0 VDC | 0 VDC |
| 1784029933 | 226 Count | 225 Count | 185 Count | 0 VDC | 0 VDC |
| 1784028130 | 223 Count | 222 Count | 183 Count | 0 VDC | 0 VDC |
| 1784026327 | 217 Count | 214 Count | 178 Count | 0 VDC | 0 VDC |
| 1784024523 | 212 Count | 209 Count | 174 Count | 0 VDC | 0 VDC |
| 1784022720 | 206 Count | 201 Count | 169 Count | 0 VDC | 0 VDC |
| 1784019151 | 191 Count | 189 Count | 160 Count | 0 VDC | 0 VDC |
| 1784015544 | 180 Count | 179 Count | 151 Count | 0 VDC | 0 VDC |
| 1784013741 | 176 Count | 175 Count | 148 Count | 0 VDC | 0 VDC |
| 1784011937 | 171 Count | 169 Count | 144 Count | 0 VDC | 0 VDC |
| 1784010135 | 165 Count | 163 Count | 139 Count | 0 VDC | 0 VDC |
| 1784008330 | 160 Count | 157 Count | 135 Count | 0 VDC | 0 VDC |
| 1784006527 | 153 Count | 150 Count | 129 Count | 0 VDC | 0 VDC |
| 1784004724 | 149 Count | 147 Count | 126 Count | 0 VDC | 0 VDC |
| 1784002920 | 143 Count | 141 Count | 121 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)