This is the latest recevied telemetry packets stored in our database for station/object IQ5VK-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768808770 | 629 | 0 | 0 | 0 | 0 |
| 1768807993 | 617 | 0 | 0 | 0 | 0 |
| 1768807103 | 618 | 0 | 0 | 0 | 0 |
| 1768806193 | 615 | 0 | 0 | 0 | 0 |
| 1768805296 | 613 | 0 | 0 | 0 | 0 |
| 1768804363 | 614 | 0 | 0 | 0 | 0 |
| 1768803463 | 615 | 0 | 0 | 0 | 0 |
| 1768802563 | 616 | 0 | 0 | 0 | 0 |
| 1768801663 | 616 | 0 | 0 | 0 | 0 |
| 1768800765 | 615 | 0 | 0 | 0 | 0 |
| 1768799832 | 617 | 0 | 0 | 0 | 0 |
| 1768798932 | 623 | 0 | 0 | 0 | 0 |
| 1768798032 | 626 | 0 | 0 | 0 | 0 |
| 1768797132 | 626 | 0 | 0 | 0 | 0 |
| 1768796235 | 626 | 0 | 0 | 0 | 0 |
| 1768795300 | 625 | 0 | 0 | 0 | 0 |
| 1768794399 | 627 | 0 | 0 | 0 | 0 |
| 1768793499 | 628 | 0 | 0 | 0 | 0 |
| 1768792599 | 628 | 0 | 0 | 0 | 0 |
| 1768791702 | 627 | 0 | 0 | 0 | 0 |
| 1768790770 | 628 | 0 | 0 | 0 | 0 |
| 1768789870 | 629 | 0 | 0 | 0 | 0 |
| 1768788970 | 629 | 0 | 0 | 0 | 0 |
| 1768788070 | 629 | 0 | 0 | 0 | 0 |
| 1768787170 | 629 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)