This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778679253 | 317 Count | 891 Count | 247 Count | 4.1 VDC | 5.52 VDC |
| 1778677455 | 313 Count | 881 Count | 244 Count | 4.1 VDC | 5.52 VDC |
| 1778675655 | 309 Count | 861 Count | 241 Count | 4.11 VDC | 5.52 VDC |
| 1778673857 | 305 Count | 851 Count | 238 Count | 4.11 VDC | 5.52 VDC |
| 1778672061 | 301 Count | 841 Count | 235 Count | 4.12 VDC | 5.52 VDC |
| 1778670263 | 296 Count | 825 Count | 231 Count | 4.12 VDC | 5.52 VDC |
| 1778668465 | 292 Count | 812 Count | 228 Count | 4.13 VDC | 5.52 VDC |
| 1778666668 | 287 Count | 803 Count | 224 Count | 4.17 VDC | 5.5 VDC |
| 1778664870 | 283 Count | 798 Count | 221 Count | 4.15 VDC | 4.6 VDC |
| 1778663077 | 279 Count | 793 Count | 218 Count | 4.13 VDC | 4.6 VDC |
| 1778661273 | 274 Count | 782 Count | 214 Count | 4.08 VDC | 4.38 VDC |
| 1778659474 | 270 Count | 774 Count | 211 Count | 4.06 VDC | 5.5 VDC |
| 1778657675 | 265 Count | 762 Count | 207 Count | 4.06 VDC | 5.5 VDC |
| 1778655877 | 261 Count | 751 Count | 204 Count | 4.06 VDC | 4.4 VDC |
| 1778654078 | 255 Count | 729 Count | 199 Count | 4.06 VDC | 4.38 VDC |
| 1778652280 | 251 Count | 718 Count | 196 Count | 4.06 VDC | 4.42 VDC |
| 1778650483 | 247 Count | 713 Count | 193 Count | 4.06 VDC | 4.42 VDC |
| 1778648684 | 242 Count | 697 Count | 189 Count | 4.06 VDC | 4.4 VDC |
| 1778646886 | 237 Count | 686 Count | 185 Count | 4.05 VDC | 5.5 VDC |
| 1778645089 | 232 Count | 677 Count | 181 Count | 4.05 VDC | 4.4 VDC |
| 1778645079 | 227 Count | 677 Count | 181 Count | 4.05 VDC | 4.4 VDC |
| 1778643282 | 223 Count | 672 Count | 178 Count | 4.04 VDC | 4.4 VDC |
| 1778641484 | 219 Count | 662 Count | 175 Count | 4.04 VDC | 4.42 VDC |
| 1778639685 | 214 Count | 644 Count | 171 Count | 4.04 VDC | 0 VDC |
| 1778637888 | 209 Count | 630 Count | 167 Count | 4.04 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)