This is the latest recevied telemetry packets stored in our database for station/object SP5XTF-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785372273 | 611 Count | 305 Count | 158 Count | 0 VDC | 0 VDC |
| 1785371373 | 610 Count | 305 Count | 158 Count | 0 VDC | 0 VDC |
| 1785370472 | 609 Count | 305 Count | 158 Count | 0 VDC | 0 VDC |
| 1785369572 | 608 Count | 305 Count | 158 Count | 0 VDC | 0 VDC |
| 1785368671 | 606 Count | 304 Count | 157 Count | 0 VDC | 0 VDC |
| 1785367770 | 605 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785366870 | 604 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785365969 | 603 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785365068 | 602 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785364168 | 601 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785363267 | 600 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785362366 | 599 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785361482 | 598 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785360582 | 597 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785359681 | 596 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785358780 | 595 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785357880 | 594 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785356979 | 593 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785356078 | 592 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785355178 | 591 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785354277 | 590 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785353376 | 589 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785352475 | 588 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785351575 | 587 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
| 1785350674 | 586 Count | 303 Count | 157 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)