This is the latest recevied telemetry packets stored in our database for station/object SR2DTW-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1774467131 | 616 Count | 618 Count | 457 Count | 0 VDC | 0 VDC |
| 1774465450 | 611 Count | 611 Count | 453 Count | 0 VDC | 0 VDC |
| 1774463769 | 606 Count | 606 Count | 449 Count | 0 VDC | 0 VDC |
| 1774462088 | 601 Count | 600 Count | 445 Count | 0 VDC | 0 VDC |
| 1774460408 | 597 Count | 591 Count | 442 Count | 0 VDC | 0 VDC |
| 1774458727 | 593 Count | 587 Count | 439 Count | 0 VDC | 0 VDC |
| 1774457046 | 588 Count | 581 Count | 435 Count | 0 VDC | 0 VDC |
| 1774455365 | 583 Count | 575 Count | 431 Count | 0 VDC | 0 VDC |
| 1774453684 | 578 Count | 569 Count | 427 Count | 0 VDC | 0 VDC |
| 1774452004 | 573 Count | 563 Count | 423 Count | 0 VDC | 0 VDC |
| 1774450323 | 562 Count | 551 Count | 413 Count | 0 VDC | 0 VDC |
| 1774448643 | 558 Count | 547 Count | 410 Count | 0 VDC | 0 VDC |
| 1774446961 | 553 Count | 542 Count | 406 Count | 0 VDC | 0 VDC |
| 1774445530 | 545 Count | 537 Count | 403 Count | 0 VDC | 0 VDC |
| 1774443849 | 540 Count | 531 Count | 399 Count | 0 VDC | 0 VDC |
| 1774442168 | 535 Count | 525 Count | 395 Count | 0 VDC | 0 VDC |
| 1774440487 | 530 Count | 520 Count | 391 Count | 0 VDC | 0 VDC |
| 1774438806 | 526 Count | 516 Count | 388 Count | 0 VDC | 0 VDC |
| 1774437126 | 522 Count | 512 Count | 385 Count | 0 VDC | 0 VDC |
| 1774435445 | 517 Count | 506 Count | 381 Count | 0 VDC | 0 VDC |
| 1774433764 | 512 Count | 500 Count | 377 Count | 0 VDC | 0 VDC |
| 1774432083 | 507 Count | 494 Count | 373 Count | 0 VDC | 0 VDC |
| 1774430403 | 502 Count | 488 Count | 369 Count | 0 VDC | 0 VDC |
| 1774428722 | 497 Count | 482 Count | 365 Count | 0 VDC | 0 VDC |
| 1774427041 | 493 Count | 477 Count | 362 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)