This is the latest recevied telemetry packets stored in our database for station/object SR2LMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1768817856 | 34 Count | 507 Count | 19 Count | 4.09 VDC | 5.34 VDC |
| 1768816954 | 32 Count | 497 Count | 18 Count | 4.09 VDC | 5.34 VDC |
| 1768816054 | 30 Count | 482 Count | 17 Count | 4.09 VDC | 5.34 VDC |
| 1768815155 | 28 Count | 474 Count | 16 Count | 4.09 VDC | 5.34 VDC |
| 1768814254 | 26 Count | 455 Count | 15 Count | 4.09 VDC | 5.34 VDC |
| 1768813355 | 24 Count | 435 Count | 14 Count | 4.09 VDC | 5.34 VDC |
| 1768812457 | 21 Count | 419 Count | 12 Count | 4.09 VDC | 5.34 VDC |
| 1768811559 | 20 Count | 396 Count | 12 Count | 4.09 VDC | 5.34 VDC |
| 1768810659 | 17 Count | 367 Count | 10 Count | 4.09 VDC | 5.34 VDC |
| 1768809760 | 16 Count | 339 Count | 10 Count | 4.15 VDC | 5.2 VDC |
| 1768808859 | 13 Count | 299 Count | 8 Count | 4.15 VDC | 5.16 VDC |
| 1768807958 | 10 Count | 238 Count | 6 Count | 4.11 VDC | 4.32 VDC |
| 1768807057 | 8 Count | 194 Count | 5 Count | 4.09 VDC | 4.26 VDC |
| 1768806158 | 6 Count | 151 Count | 4 Count | 4.07 VDC | 4.26 VDC |
| 1768805258 | 4 Count | 112 Count | 3 Count | 4.06 VDC | 4.26 VDC |
| 1768804358 | 2 Count | 48 Count | 2 Count | 4.06 VDC | 1.2 VDC |
| 1768803458 | 75 Count | 1041 Count | 46 Count | 4.06 VDC | 0 VDC |
| 1768802558 | 74 Count | 997 Count | 46 Count | 4.06 VDC | 0 VDC |
| 1768801659 | 71 Count | 949 Count | 44 Count | 4.07 VDC | 0 VDC |
| 1768800758 | 70 Count | 900 Count | 44 Count | 4.07 VDC | 0 VDC |
| 1768799857 | 67 Count | 858 Count | 42 Count | 4.07 VDC | 0 VDC |
| 1768798958 | 66 Count | 825 Count | 42 Count | 4.06 VDC | 0 VDC |
| 1768798058 | 62 Count | 782 Count | 39 Count | 4.07 VDC | 0 VDC |
| 1768797158 | 60 Count | 745 Count | 38 Count | 4.07 VDC | 0 VDC |
| 1768796259 | 57 Count | 708 Count | 36 Count | 4.07 VDC | 0 VDC |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 0.01, 0
Value5: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)