This is the latest recevied telemetry packets stored in our database for station/object 9W8ASH-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781402412 | 498 Count | 1291 Count | 493 Count | 0 VDC | 0 VDC |
| 1781395208 | 380 Count | 993 Count | 376 Count | 0 VDC | 0 VDC |
| 1781388012 | 316 Count | 781 Count | 313 Count | 0 VDC | 0 VDC |
| 1781380808 | 253 Count | 634 Count | 251 Count | 0 VDC | 0 VDC |
| 1781373608 | 193 Count | 494 Count | 192 Count | 0 VDC | 0 VDC |
| 1781366411 | 115 Count | 293 Count | 115 Count | 0 VDC | 0 VDC |
| 1781359207 | 452 Count | 1120 Count | 448 Count | 0 VDC | 0 VDC |
| 1781352008 | 375 Count | 945 Count | 372 Count | 0 VDC | 0 VDC |
| 1781344809 | 270 Count | 711 Count | 268 Count | 0 VDC | 0 VDC |
| 1781337606 | 204 Count | 527 Count | 203 Count | 0 VDC | 0 VDC |
| 1781330402 | 94 Count | 256 Count | 94 Count | 0 VDC | 0 VDC |
| 1781323212 | 490 Count | 1202 Count | 485 Count | 0 VDC | 0 VDC |
| 1781301608 | 218 Count | 475 Count | 216 Count | 0 VDC | 0 VDC |
| 1781294404 | 141 Count | 314 Count | 140 Count | 0 VDC | 0 VDC |
| 1781287201 | 74 Count | 167 Count | 74 Count | 0 VDC | 0 VDC |
| 1781280008 | 387 Count | 1043 Count | 382 Count | 0 VDC | 0 VDC |
| 1781272804 | 317 Count | 893 Count | 313 Count | 0 VDC | 0 VDC |
| 1781265600 | 236 Count | 734 Count | 233 Count | 0 VDC | 0 VDC |
| 1781263098 | 235 Count | 734 Count | 233 Count | 0 VDC | 0 VDC |
| 1781255894 | 165 Count | 525 Count | 164 Count | 0 VDC | 0 VDC |
| 1781248700 | 79 Count | 206 Count | 79 Count | 0 VDC | 0 VDC |
| 1781241493 | 435 Count | 1187 Count | 430 Count | 0 VDC | 0 VDC |
| 1781234290 | 354 Count | 959 Count | 350 Count | 0 VDC | 0 VDC |
| 1781227096 | 258 Count | 755 Count | 255 Count | 0 VDC | 0 VDC |
| 1781219892 | 194 Count | 576 Count | 192 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)