This is the latest recevied telemetry packets stored in our database for station/object SP2SGK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792157874 | 691 Count | 312 Count | 312 Count | 3.31 VDC | 0.16 VDC |
| 1792156973 | 690 Count | 312 Count | 312 Count | 3.44 VDC | 0.16 VDC |
| 1792156073 | 689 Count | 312 Count | 312 Count | 3.49 VDC | 0.16 VDC |
| 1792155172 | 688 Count | 312 Count | 312 Count | 3.53 VDC | 0.16 VDC |
| 1792154271 | 687 Count | 312 Count | 312 Count | 3.57 VDC | 0.16 VDC |
| 1792153371 | 686 Count | 312 Count | 312 Count | 3.59 VDC | 0.16 VDC |
| 1792152470 | 685 Count | 312 Count | 312 Count | 3.61 VDC | 0.16 VDC |
| 1792151569 | 684 Count | 312 Count | 312 Count | 3.63 VDC | 0.16 VDC |
| 1792150669 | 683 Count | 312 Count | 312 Count | 3.66 VDC | 0.16 VDC |
| 1792149768 | 679 Count | 309 Count | 309 Count | 3.69 VDC | 0.16 VDC |
| 1792148867 | 678 Count | 309 Count | 309 Count | 3.72 VDC | 0.16 VDC |
| 1792147967 | 677 Count | 309 Count | 309 Count | 3.76 VDC | 0.16 VDC |
| 1792147066 | 676 Count | 309 Count | 309 Count | 3.82 VDC | 0.16 VDC |
| 1792146165 | 675 Count | 309 Count | 309 Count | 3.87 VDC | 0.16 VDC |
| 1792145264 | 674 Count | 309 Count | 309 Count | 3.92 VDC | 0.16 VDC |
| 1792144364 | 673 Count | 309 Count | 309 Count | 3.98 VDC | 0.16 VDC |
| 1792143463 | 672 Count | 309 Count | 309 Count | 4.04 VDC | 0.16 VDC |
| 1792142562 | 671 Count | 309 Count | 309 Count | 4.06 VDC | 0.16 VDC |
| 1792141662 | 667 Count | 306 Count | 306 Count | 4.18 VDC | 0.16 VDC |
| 1792140761 | 665 Count | 305 Count | 305 Count | 4.19 VDC | 0.16 VDC |
| 1792139860 | 659 Count | 300 Count | 300 Count | 4.18 VDC | 0.16 VDC |
| 1792138960 | 657 Count | 299 Count | 299 Count | 4.19 VDC | 0.14 VDC |
| 1792138075 | 652 Count | 295 Count | 295 Count | 4.19 VDC | 0.16 VDC |
| 1792137174 | 651 Count | 295 Count | 295 Count | 4.18 VDC | 0.16 VDC |
| 1792136273 | 650 Count | 295 Count | 295 Count | 4.19 VDC | 0.16 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)