This is the latest recevied telemetry packets stored in our database for station/object SP2DRP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1791142422 | 201 Count | 475 Count | 156 Count | 0 VDC | 0 VDC |
| 1791139347 | 172 Count | 429 Count | 144 Count | 0 VDC | 0 VDC |
| 1791137546 | 155 Count | 396 Count | 131 Count | 0 VDC | 0 VDC |
| 1791135745 | 138 Count | 361 Count | 118 Count | 0 VDC | 0 VDC |
| 1791133945 | 119 Count | 323 Count | 103 Count | 0 VDC | 0 VDC |
| 1791132134 | 99 Count | 278 Count | 87 Count | 0 VDC | 0 VDC |
| 1791130328 | 56 Count | 145 Count | 48 Count | 0 VDC | 0 VDC |
| 1791128527 | 17 Count | 44 Count | 14 Count | 0 VDC | 0 VDC |
| 1791126716 | 487 Count | 1007 Count | 383 Count | 0 VDC | 0 VDC |
| 1791124916 | 442 Count | 942 Count | 342 Count | 0 VDC | 0 VDC |
| 1791123115 | 423 Count | 899 Count | 327 Count | 0 VDC | 0 VDC |
| 1791121315 | 407 Count | 866 Count | 315 Count | 0 VDC | 0 VDC |
| 1791121101 | 404 Count | 861 Count | 313 Count | 0 VDC | 0 VDC |
| 1791119301 | 387 Count | 815 Count | 300 Count | 0 VDC | 0 VDC |
| 1791119288 | 384 Count | 813 Count | 300 Count | 0 VDC | 0 VDC |
| 1791117610 | 366 Count | 777 Count | 288 Count | 0 VDC | 0 VDC |
| 1791115810 | 350 Count | 743 Count | 276 Count | 0 VDC | 0 VDC |
| 1791115073 | 343 Count | 731 Count | 272 Count | 0 VDC | 0 VDC |
| 1791113273 | 325 Count | 695 Count | 258 Count | 0 VDC | 0 VDC |
| 1791111770 | 303 Count | 651 Count | 244 Count | 0 VDC | 0 VDC |
| 1791109969 | 262 Count | 525 Count | 207 Count | 0 VDC | 0 VDC |
| 1791108169 | 230 Count | 409 Count | 179 Count | 0 VDC | 0 VDC |
| 1791106368 | 215 Count | 376 Count | 168 Count | 0 VDC | 0 VDC |
| 1791104567 | 185 Count | 329 Count | 142 Count | 0 VDC | 0 VDC |
| 1791043800 | 177 Count | 323 Count | 141 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)