This is the latest recevied telemetry packets stored in our database for station/object DL1KDA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781410020 | 229 Count | 623 Count | 192 Count | 0 VDC | 0 VDC |
| 1781408214 | 224 Count | 604 Count | 188 Count | 0 VDC | 0 VDC |
| 1781406409 | 215 Count | 579 Count | 180 Count | 0 VDC | 0 VDC |
| 1781404605 | 210 Count | 566 Count | 176 Count | 0 VDC | 0 VDC |
| 1781402862 | 199 Count | 552 Count | 166 Count | 0 VDC | 0 VDC |
| 1781401058 | 198 Count | 552 Count | 166 Count | 0 VDC | 0 VDC |
| 1781399250 | 193 Count | 536 Count | 162 Count | 0 VDC | 0 VDC |
| 1781397446 | 190 Count | 523 Count | 160 Count | 0 VDC | 0 VDC |
| 1781395642 | 186 Count | 511 Count | 157 Count | 0 VDC | 0 VDC |
| 1781393839 | 179 Count | 483 Count | 151 Count | 0 VDC | 0 VDC |
| 1781392033 | 172 Count | 460 Count | 145 Count | 0 VDC | 0 VDC |
| 1781390229 | 167 Count | 450 Count | 141 Count | 0 VDC | 0 VDC |
| 1781388424 | 164 Count | 445 Count | 139 Count | 0 VDC | 0 VDC |
| 1781386620 | 157 Count | 432 Count | 133 Count | 0 VDC | 0 VDC |
| 1781384816 | 149 Count | 400 Count | 126 Count | 0 VDC | 0 VDC |
| 1781383012 | 147 Count | 398 Count | 125 Count | 0 VDC | 0 VDC |
| 1781381253 | 141 Count | 385 Count | 120 Count | 0 VDC | 0 VDC |
| 1781379447 | 136 Count | 368 Count | 116 Count | 0 VDC | 0 VDC |
| 1781377643 | 125 Count | 343 Count | 107 Count | 0 VDC | 0 VDC |
| 1781375838 | 121 Count | 335 Count | 104 Count | 0 VDC | 0 VDC |
| 1781374038 | 114 Count | 312 Count | 98 Count | 0 VDC | 0 VDC |
| 1781372229 | 108 Count | 293 Count | 93 Count | 0 VDC | 0 VDC |
| 1781370425 | 104 Count | 282 Count | 90 Count | 0 VDC | 0 VDC |
| 1781368621 | 99 Count | 265 Count | 86 Count | 0 VDC | 0 VDC |
| 1781366817 | 90 Count | 242 Count | 78 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)