This is the latest recevied telemetry packets stored in our database for station/object SP8RPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775752414 | 32 Count | 58 Count | 32 Count | 0 VDC | 0 VDC |
| 1775745202 | 433 Count | 728 Count | 416 Count | 0 VDC | 0 VDC |
| 1775742801 | 352 Count | 579 Count | 337 Count | 0 VDC | 0 VDC |
| 1775740404 | 316 Count | 489 Count | 303 Count | 0 VDC | 0 VDC |
| 1775738000 | 269 Count | 404 Count | 259 Count | 0 VDC | 0 VDC |
| 1775733209 | 200 Count | 287 Count | 197 Count | 0 VDC | 0 VDC |
| 1775730817 | 163 Count | 226 Count | 162 Count | 0 VDC | 0 VDC |
| 1775726006 | 490 Count | 962 Count | 466 Count | 0 VDC | 0 VDC |
| 1775718798 | 381 Count | 744 Count | 363 Count | 0 VDC | 0 VDC |
| 1775711607 | 259 Count | 499 Count | 251 Count | 0 VDC | 0 VDC |
| 1775709209 | 218 Count | 422 Count | 212 Count | 0 VDC | 0 VDC |
| 1775706804 | 170 Count | 320 Count | 166 Count | 0 VDC | 0 VDC |
| 1775704412 | 137 Count | 236 Count | 135 Count | 0 VDC | 0 VDC |
| 1775699605 | 506 Count | 931 Count | 471 Count | 0 VDC | 0 VDC |
| 1775697199 | 471 Count | 853 Count | 438 Count | 0 VDC | 0 VDC |
| 1775692411 | 390 Count | 685 Count | 365 Count | 0 VDC | 0 VDC |
| 1775690009 | 355 Count | 615 Count | 332 Count | 0 VDC | 0 VDC |
| 1775687607 | 315 Count | 533 Count | 294 Count | 0 VDC | 0 VDC |
| 1775682804 | 242 Count | 398 Count | 225 Count | 0 VDC | 0 VDC |
| 1775680402 | 212 Count | 338 Count | 197 Count | 0 VDC | 0 VDC |
| 1775675599 | 149 Count | 227 Count | 138 Count | 0 VDC | 0 VDC |
| 1775673195 | 103 Count | 154 Count | 95 Count | 0 VDC | 0 VDC |
| 1775670813 | 66 Count | 102 Count | 63 Count | 0 VDC | 0 VDC |
| 1775661209 | 560 Count | 916 Count | 532 Count | 0 VDC | 0 VDC |
| 1775656397 | 497 Count | 807 Count | 473 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)