This is the latest recevied telemetry packets stored in our database for station/object F4GCF-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1788975857 | 0 Count | 792 Count | 411 Count | 0 VDC | 0 VDC |
| 1788975257 | 0 Count | 767 Count | 399 Count | 0 VDC | 0 VDC |
| 1788974657 | 0 Count | 750 Count | 391 Count | 0 VDC | 0 VDC |
| 1788974057 | 0 Count | 735 Count | 386 Count | 0 VDC | 0 VDC |
| 1788973457 | 0 Count | 715 Count | 378 Count | 0 VDC | 0 VDC |
| 1788972857 | 0 Count | 703 Count | 371 Count | 0 VDC | 0 VDC |
| 1788972257 | 0 Count | 690 Count | 365 Count | 0 VDC | 0 VDC |
| 1788971657 | 0 Count | 675 Count | 357 Count | 0 VDC | 0 VDC |
| 1788971057 | 0 Count | 664 Count | 351 Count | 0 VDC | 0 VDC |
| 1788970456 | 0 Count | 650 Count | 344 Count | 0 VDC | 0 VDC |
| 1788969856 | 0 Count | 636 Count | 337 Count | 0 VDC | 0 VDC |
| 1788969256 | 0 Count | 632 Count | 334 Count | 0 VDC | 0 VDC |
| 1788968656 | 0 Count | 624 Count | 328 Count | 0 VDC | 0 VDC |
| 1788968056 | 0 Count | 604 Count | 320 Count | 0 VDC | 0 VDC |
| 1788967456 | 0 Count | 598 Count | 317 Count | 0 VDC | 0 VDC |
| 1788966856 | 0 Count | 583 Count | 309 Count | 0 VDC | 0 VDC |
| 1788966256 | 0 Count | 554 Count | 297 Count | 0 VDC | 0 VDC |
| 1788965656 | 0 Count | 550 Count | 295 Count | 0 VDC | 0 VDC |
| 1788965055 | 0 Count | 542 Count | 290 Count | 0 VDC | 0 VDC |
| 1788964455 | 0 Count | 533 Count | 285 Count | 0 VDC | 0 VDC |
| 1788963855 | 0 Count | 519 Count | 278 Count | 0 VDC | 0 VDC |
| 1788963255 | 0 Count | 509 Count | 273 Count | 0 VDC | 0 VDC |
| 1788962655 | 0 Count | 493 Count | 263 Count | 0 VDC | 0 VDC |
| 1788962055 | 0 Count | 490 Count | 262 Count | 0 VDC | 0 VDC |
| 1788961455 | 0 Count | 478 Count | 255 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)