This is the latest recevied telemetry packets stored in our database for station/object SR8RZE-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1775752455 | 47 Count | 266 Count | 30 Count | 0 VDC | 0 VDC |
| 1775751554 | 44 Count | 238 Count | 28 Count | 0 VDC | 0 VDC |
| 1775750654 | 43 Count | 238 Count | 28 Count | 0 VDC | 0 VDC |
| 1775749753 | 42 Count | 228 Count | 28 Count | 0 VDC | 0 VDC |
| 1775748852 | 39 Count | 193 Count | 26 Count | 0 VDC | 0 VDC |
| 1775747952 | 36 Count | 173 Count | 24 Count | 0 VDC | 0 VDC |
| 1775747051 | 34 Count | 156 Count | 23 Count | 0 VDC | 0 VDC |
| 1775746150 | 28 Count | 122 Count | 18 Count | 0 VDC | 0 VDC |
| 1775745250 | 27 Count | 116 Count | 18 Count | 0 VDC | 0 VDC |
| 1775744349 | 24 Count | 86 Count | 16 Count | 0 VDC | 0 VDC |
| 1775743449 | 19 Count | 66 Count | 13 Count | 0 VDC | 0 VDC |
| 1775742562 | 14 Count | 51 Count | 12 Count | 0 VDC | 0 VDC |
| 1775741662 | 12 Count | 39 Count | 11 Count | 0 VDC | 0 VDC |
| 1775740761 | 3 Count | 11 Count | 3 Count | 0 VDC | 0 VDC |
| 1775739860 | 210 Count | 1015 Count | 145 Count | 0 VDC | 0 VDC |
| 1775738959 | 204 Count | 991 Count | 140 Count | 0 VDC | 0 VDC |
| 1775738059 | 202 Count | 972 Count | 139 Count | 0 VDC | 0 VDC |
| 1775737158 | 201 Count | 972 Count | 139 Count | 0 VDC | 0 VDC |
| 1775736258 | 198 Count | 955 Count | 137 Count | 0 VDC | 0 VDC |
| 1775735357 | 192 Count | 932 Count | 132 Count | 0 VDC | 0 VDC |
| 1775734456 | 190 Count | 917 Count | 131 Count | 0 VDC | 0 VDC |
| 1775733556 | 187 Count | 904 Count | 129 Count | 0 VDC | 0 VDC |
| 1775732655 | 185 Count | 896 Count | 128 Count | 0 VDC | 0 VDC |
| 1775731754 | 179 Count | 877 Count | 123 Count | 0 VDC | 0 VDC |
| 1775730854 | 177 Count | 856 Count | 122 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)