This is the latest recevied telemetry packets stored in our database for station/object SV1SSF-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1785359655 | 106 Count | 260 Count | 100 Count | 0 VDC | 0 VDC |
| 1785357849 | 94 Count | 223 Count | 89 Count | 0 VDC | 0 VDC |
| 1785356044 | 76 Count | 181 Count | 72 Count | 0 VDC | 0 VDC |
| 1785354236 | 64 Count | 145 Count | 61 Count | 0 VDC | 0 VDC |
| 1785352432 | 47 Count | 110 Count | 45 Count | 0 VDC | 0 VDC |
| 1785350625 | 32 Count | 75 Count | 31 Count | 0 VDC | 0 VDC |
| 1785348820 | 16 Count | 43 Count | 16 Count | 0 VDC | 0 VDC |
| 1785347015 | 426 Count | 1039 Count | 402 Count | 0 VDC | 0 VDC |
| 1785345209 | 388 Count | 956 Count | 365 Count | 0 VDC | 0 VDC |
| 1785343408 | 367 Count | 909 Count | 345 Count | 0 VDC | 0 VDC |
| 1785341598 | 355 Count | 875 Count | 334 Count | 0 VDC | 0 VDC |
| 1785339789 | 337 Count | 830 Count | 317 Count | 0 VDC | 0 VDC |
| 1785338246 | 328 Count | 800 Count | 309 Count | 0 VDC | 0 VDC |
| 1785336440 | 315 Count | 764 Count | 297 Count | 0 VDC | 0 VDC |
| 1785334635 | 300 Count | 727 Count | 283 Count | 0 VDC | 0 VDC |
| 1785332830 | 286 Count | 691 Count | 270 Count | 0 VDC | 0 VDC |
| 1785331024 | 272 Count | 666 Count | 257 Count | 0 VDC | 0 VDC |
| 1785329219 | 260 Count | 629 Count | 246 Count | 0 VDC | 0 VDC |
| 1785327413 | 244 Count | 588 Count | 231 Count | 0 VDC | 0 VDC |
| 1785325608 | 230 Count | 559 Count | 218 Count | 0 VDC | 0 VDC |
| 1785323802 | 214 Count | 525 Count | 203 Count | 0 VDC | 0 VDC |
| 1785321997 | 198 Count | 487 Count | 188 Count | 0 VDC | 0 VDC |
| 1785320191 | 184 Count | 449 Count | 175 Count | 0 VDC | 0 VDC |
| 1785318386 | 169 Count | 409 Count | 161 Count | 0 VDC | 0 VDC |
| 1785316581 | 153 Count | 375 Count | 146 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)