This is the latest recevied telemetry packets stored in our database for station/object M9PHD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1781417090 | 701 Count | 579 Count | 398 Count | 0 VDC | 0 VDC |
| 1781416489 | 699 Count | 577 Count | 397 Count | 0 VDC | 0 VDC |
| 1781415888 | 697 Count | 575 Count | 396 Count | 0 VDC | 0 VDC |
| 1781415288 | 695 Count | 573 Count | 395 Count | 0 VDC | 0 VDC |
| 1781414687 | 693 Count | 571 Count | 394 Count | 0 VDC | 0 VDC |
| 1781414086 | 691 Count | 569 Count | 393 Count | 0 VDC | 0 VDC |
| 1781413486 | 689 Count | 567 Count | 392 Count | 0 VDC | 0 VDC |
| 1781412885 | 687 Count | 565 Count | 391 Count | 0 VDC | 0 VDC |
| 1781412284 | 685 Count | 563 Count | 390 Count | 0 VDC | 0 VDC |
| 1781411684 | 683 Count | 561 Count | 389 Count | 0 VDC | 0 VDC |
| 1781411083 | 681 Count | 559 Count | 388 Count | 0 VDC | 0 VDC |
| 1781410482 | 679 Count | 557 Count | 387 Count | 0 VDC | 0 VDC |
| 1781409882 | 677 Count | 555 Count | 386 Count | 0 VDC | 0 VDC |
| 1781409281 | 675 Count | 553 Count | 385 Count | 0 VDC | 0 VDC |
| 1781408707 | 673 Count | 551 Count | 384 Count | 0 VDC | 0 VDC |
| 1781408106 | 671 Count | 549 Count | 383 Count | 0 VDC | 0 VDC |
| 1781407505 | 669 Count | 547 Count | 382 Count | 0 VDC | 0 VDC |
| 1781406904 | 667 Count | 545 Count | 381 Count | 0 VDC | 0 VDC |
| 1781406304 | 665 Count | 543 Count | 380 Count | 0 VDC | 0 VDC |
| 1781405703 | 663 Count | 541 Count | 379 Count | 0 VDC | 0 VDC |
| 1781405102 | 661 Count | 539 Count | 378 Count | 0 VDC | 0 VDC |
| 1781404502 | 655 Count | 533 Count | 373 Count | 0 VDC | 0 VDC |
| 1781403901 | 653 Count | 531 Count | 372 Count | 0 VDC | 0 VDC |
| 1781403300 | 651 Count | 529 Count | 371 Count | 0 VDC | 0 VDC |
| 1781402700 | 649 Count | 527 Count | 370 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)