This is the latest recevied telemetry packets stored in our database for station/object GW3ATZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1783267138 | 111 Count | 207 Count | 89 Count | 4.23 VDC | 0.14 VDC |
| 1783265330 | 103 Count | 186 Count | 83 Count | 4.21 VDC | 0.14 VDC |
| 1783263521 | 95 Count | 171 Count | 77 Count | 4.22 VDC | 0.14 VDC |
| 1783261713 | 84 Count | 147 Count | 68 Count | 4.23 VDC | 0.14 VDC |
| 1783259905 | 76 Count | 131 Count | 62 Count | 4.25 VDC | 0.14 VDC |
| 1783258097 | 68 Count | 120 Count | 56 Count | 4.24 VDC | 0.14 VDC |
| 1783256385 | 54 Count | 93 Count | 44 Count | 4.24 VDC | 0.14 VDC |
| 1783254577 | 35 Count | 59 Count | 27 Count | 4.23 VDC | 0.14 VDC |
| 1783252769 | 27 Count | 47 Count | 21 Count | 4.25 VDC | 0.14 VDC |
| 1783250961 | 19 Count | 31 Count | 15 Count | 4.2 VDC | 0.14 VDC |
| 1783249152 | 11 Count | 20 Count | 9 Count | 4.24 VDC | 0.14 VDC |
| 1783247344 | 3 Count | 7 Count | 3 Count | 4.25 VDC | 0.14 VDC |
| 1783245536 | 678 Count | 996 Count | 526 Count | 4.2 VDC | 0.14 VDC |
| 1783243728 | 670 Count | 986 Count | 520 Count | 4.21 VDC | 0.14 VDC |
| 1783241920 | 662 Count | 976 Count | 514 Count | 4.26 VDC | 0.14 VDC |
| 1783240111 | 653 Count | 959 Count | 507 Count | 4.23 VDC | 0.16 VDC |
| 1783238303 | 645 Count | 945 Count | 501 Count | 4.22 VDC | 0.14 VDC |
| 1783236495 | 637 Count | 932 Count | 495 Count | 4.25 VDC | 0.14 VDC |
| 1783234787 | 630 Count | 919 Count | 490 Count | 4.25 VDC | 0.14 VDC |
| 1783232979 | 622 Count | 903 Count | 484 Count | 4.26 VDC | 0.14 VDC |
| 1783231170 | 614 Count | 884 Count | 478 Count | 4.25 VDC | 0.14 VDC |
| 1783229362 | 605 Count | 862 Count | 471 Count | 4.19 VDC | 0.14 VDC |
| 1783227554 | 597 Count | 846 Count | 465 Count | 4.23 VDC | 0.14 VDC |
| 1783225746 | 589 Count | 830 Count | 459 Count | 4.24 VDC | 0.14 VDC |
| 1783223938 | 581 Count | 815 Count | 453 Count | 4.22 VDC | 0.14 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)