This is the latest recevied telemetry packets stored in our database for station/object SR8MBR-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1778670343 | 106 Count | 280 Count | 103 Count | 0 VDC | 0 VDC |
| 1778668541 | 71 Count | 195 Count | 69 Count | 0 VDC | 0 VDC |
| 1778666740 | 57 Count | 154 Count | 56 Count | 0 VDC | 0 VDC |
| 1778664939 | 12 Count | 38 Count | 12 Count | 0 VDC | 0 VDC |
| 1778663139 | 413 Count | 1085 Count | 382 Count | 0 VDC | 0 VDC |
| 1778661338 | 390 Count | 998 Count | 360 Count | 0 VDC | 0 VDC |
| 1778630792 | 20 Count | 69 Count | 20 Count | 0 VDC | 0 VDC |
| 1778628991 | 362 Count | 1044 Count | 345 Count | 0 VDC | 0 VDC |
| 1778627191 | 332 Count | 957 Count | 316 Count | 0 VDC | 0 VDC |
| 1778625391 | 307 Count | 881 Count | 292 Count | 0 VDC | 0 VDC |
| 1778623590 | 279 Count | 802 Count | 265 Count | 0 VDC | 0 VDC |
| 1778621789 | 250 Count | 734 Count | 237 Count | 0 VDC | 0 VDC |
| 1778619988 | 249 Count | 731 Count | 237 Count | 0 VDC | 0 VDC |
| 1778618188 | 242 Count | 705 Count | 231 Count | 0 VDC | 0 VDC |
| 1778616387 | 223 Count | 653 Count | 213 Count | 0 VDC | 0 VDC |
| 1778614586 | 191 Count | 557 Count | 182 Count | 0 VDC | 0 VDC |
| 1778612786 | 157 Count | 453 Count | 149 Count | 0 VDC | 0 VDC |
| 1778610858 | 130 Count | 385 Count | 128 Count | 0 VDC | 0 VDC |
| 1778609058 | 93 Count | 277 Count | 92 Count | 0 VDC | 0 VDC |
| 1778607257 | 46 Count | 145 Count | 46 Count | 0 VDC | 0 VDC |
| 1778605456 | 391 Count | 1042 Count | 372 Count | 0 VDC | 0 VDC |
| 1778601855 | 315 Count | 842 Count | 298 Count | 0 VDC | 0 VDC |
| 1778600054 | 269 Count | 716 Count | 253 Count | 0 VDC | 0 VDC |
| 1778568922 | 162 Count | 471 Count | 159 Count | 0 VDC | 0 VDC |
| 1778565321 | 68 Count | 199 Count | 67 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)